48*96 Digital Mould Temperature Controller Controller with SSR and Relay Output

MC401 Series Temperature Controller Main Datas:
1). Input: Universal
     Thermocouple (TC), Resistance temperature detact (RTD),
     Standard current and voltage signals
2). Display: Process Value (PV), Setting Value (SV): -1999~+1999
     Output (OUT1,OUT2) Alarm (ALM1,ALM2) Auto setting (AT)
2). Output: Relay, SSR, 4-20mA, 0-10V
3). Alarm: 1 or 2
4). Control: PID or ON

Summary:
MC401 series PID temperature controller has Four-digit LED digital display,measurent accuracy 0.3%, the maximum resolution 0.1,degree at thermocouple and thermal resistance input,and the maximum resolution 0.001 at analong input.  it is the new product developed by our company. It adopts special microcomputer adjusting meter that employs switching power and surface mount technology(SMT), therefore, the controller is quite smart and reliable. Its special functions like auto diagnosing, auto setting and intelligent control. It can be used widely in the display and controling of the parameter of the temperature pressure, flow, and liquid level.

Main Technical Index:
1. Input: Universal input, Thermocouple(TC), RTD, Standard Current and voltage signals
2. Display: Process Value(PV), Setting Value(SV), Output, Alarm, Auto setting.
3. Control way: (1) PID Control (inluding ON/OFF, position PID and continuous PID)
                         (2) Auto Setting Control

4. Accuracy:
Mesurement: ± 3%FS
Compesation error of cold terminal: +-2%(amend with 0~50C by soft)
Resolution: 14bit
Sampling period: 0.5s

5. Setting range:
Setting value(SV): Same range with PV
Proportional Time(P): 0~full range(ON/OFF Control when set to 0)
Integration Time(I): 0~3600sec(no integration action when set to 0)
Deriative Time(D): 0~3600sec(no deviative action when set to 0)
Proportional Period: 1~100sec
On/Off control output hysteretic loop width: 1~100C(or other PV units)

6. Control output:
(1). Currency: DC 0~10mA(RL< 500Ω )
(2). Voltage: DC 0~5V, 1~5V(RL> 10K)
(3). Relay: Contact capacity: 250V AC 3A
(4). Voltage impulse: 0~12V (appliable for solid state relay SSR)
(5). Silicon Controlled Rectifier(SCR): Zero-cross triggering or phase-shift triggering(resistive load)
(6). Alarming funtion: 2 groups output at most, 12 modes output contact capacity: 250V AC 3A

7. Other Parameters:
(1). Insulation resistance: > 50MΩ (500V DC)
(2). Insulation strength: 1500V AC/min
(3). Power consumption: < 10V
(4). Service environment: 0~50C, 30~85RH, no corrosive gas

8. Weight: 0.5Kg 
1. High Cost Performance
2. Easily Using
3. Perfect Performance
4. Low Price