Counting Scale Electronic Parts S Type Tension and Compression Load Cell
1.High-precision resistance strain principle
2.Can meet force measurement in the range of 0.25-20klb
3. Stainless steel and alloy steel for your free selection
4. S structural design, pressure-bearing, easy to install and flexible.
5. Intrinsically safe products for harsh environments and dangerous situations.
6. Sealed welding, grease-proof, waterproof, corrosion prevention.
7. Small size, good-look appearance
8. Dynamic response of high frequency
Â
Item | Unit | Parameters | |||||||
Accuracy class to OIML R60 Â | Â | C2 | C3 | ||||||
Maximum capacity (Emax) | klb | 0.25,0.3,0.5,1,1.5,2,3,5,7.5,10,20 | |||||||
Minimum LC verification interval (Vmin) | % of Emax | 0.0200 | 0.0100 | ||||||
Sensitivity (Cn)  | mV/V | 3.0 ± 0.003 | |||||||
Zero balance | mV/V | 0 ± 0.03 | |||||||
Temp. effect on zero balance (TK0) | % of Cn/10K | ±0.02 | ±0.0170 | ||||||
Temp. effect on sensitivity (TKc) | % of Cn/10K | ±0.02 | ±0.0170 | ||||||
Hysteresis error (dhy) | % of Cn | ±0.0270 | ±0.0180 | ||||||
Non-linearity (dlin) | % of Cn | ±0.0250 | ±0.0167 | ||||||
Creep (dcr) over 30 min | % of Cn | ±0.030 | ±0.0167 | ||||||
Input (RLC) & Output resistance (R0) | Ω | 400±10 & 352±3 | |||||||
Nominal range of excitation voltage (Bu)Â | V | 5~12 | |||||||
Insulation resistance (Ris) at 50Vdc | MΩ | ≥5000 | |||||||
Service temp. range (Btu) | ºC | -30----+70 | |||||||
Safe load limit (EL) &Â Breaking load (ED) | % of Emax | 120 &Â 200 | |||||||
Protection calss according to EN 60 529 (IEC 529) Â | Â | 0.25~3klb: IP65; 5~20klb: IP68 |
|||||||
Material: Measuring element Cable fitting / Cable sheath  |
 | Alloy steel or stainless steel Stainless steel or Nickel-plated brass PVC |
|||||||
Cable Diameter: ø5mm,Length | m | 5 |
Varieties of products related to load cells as below, that meet all your needs, and save your time, welcome to browse our website to get more surprises.
So many kinds of test equipments are used for pre-shipment inspection, in order to make sure all performance of our products reaches the optimal standard.
>>> Independent small inner box is used to protect each product;
>>> Then 6-10 pcs inner boxes place in a carton with bandage;
>>>Â Several cartons place on a pallet, easy to unload cargo;
>>> Last but not least, all cartons are wrapped with moistureproof plastic wrap,
      it's strongly necessary for goods shipped by sea.
DHL, UPS, EMS, TNT ect Express and by air or by sea, any shipping method is available, and we will account price and haulage time of each way for your selection before placing order.
CE, RoHs, ISO9001, OIML etc certificates, ensure products with high-class quality for all customers.
Â
Counting Scale Electronic Parts S Type Tension and Compression Load Cell
1.High-precision resistance strain principle
2.Can meet force measurement in the range of 0.25-20klb
3. Stainless steel and alloy steel for your free selection
4. S structural design, pressure-bearing, easy to install and flexible.
5. Intrinsically safe products for harsh environments and dangerous situations.
6. Sealed welding, grease-proof, waterproof, corrosion prevention.
7. Small size, good-look appearance
8. Dynamic response of high frequency
Â
Item | Unit | Parameters | |||||||
Accuracy class to OIML R60 Â | Â | C2 | C3 | ||||||
Maximum capacity (Emax) | klb | 0.25,0.3,0.5,1,1.5,2,3,5,7.5,10,20 | |||||||
Minimum LC verification interval (Vmin) | % of Emax | 0.0200 | 0.0100 | ||||||
Sensitivity (Cn)  | mV/V | 3.0 ± 0.003 | |||||||
Zero balance | mV/V | 0 ± 0.03 | |||||||
Temp. effect on zero balance (TK0) | % of Cn/10K | ±0.02 | ±0.0170 | ||||||
Temp. effect on sensitivity (TKc) | % of Cn/10K | ±0.02 | ±0.0170 | ||||||
Hysteresis error (dhy) | % of Cn | ±0.0270 | ±0.0180 | ||||||
Non-linearity (dlin) | % of Cn | ±0.0250 | ±0.0167 | ||||||
Creep (dcr) over 30 min | % of Cn | ±0.030 | ±0.0167 | ||||||
Input (RLC) & Output resistance (R0) | Ω | 400±10 & 352±3 | |||||||
Nominal range of excitation voltage (Bu)Â | V | 5~12 | |||||||
Insulation resistance (Ris) at 50Vdc | MΩ | ≥5000 | |||||||
Service temp. range (Btu) | ºC | -30----+70 | |||||||
Safe load limit (EL) &Â Breaking load (ED) | % of Emax | 120 &Â 200 | |||||||
Protection calss according to EN 60 529 (IEC 529) Â | Â | 0.25~3klb: IP65; 5~20klb: IP68 |
|||||||
Material: Measuring element Cable fitting / Cable sheath  |
 | Alloy steel or stainless steel Stainless steel or Nickel-plated brass PVC |
|||||||
Cable Diameter: ø5mm,Length | m | 5 |
Varieties of products related to load cells as below, that meet all your needs, and save your time, welcome to browse our website to get more surprises.
So many kinds of test equipments are used for pre-shipment inspection, in order to make sure all performance of our products reaches the optimal standard.
>>> Independent small inner box is used to protect each product;
>>> Then 6-10 pcs inner boxes place in a carton with bandage;
>>>Â Several cartons place on a pallet, easy to unload cargo;
>>> Last but not least, all cartons are wrapped with moistureproof plastic wrap,
      it's strongly necessary for goods shipped by sea.
DHL, UPS, EMS, TNT ect Express and by air or by sea, any shipping method is available, and we will account price and haulage time of each way for your selection before placing order.
CE, RoHs, ISO9001, OIML etc certificates, ensure products with high-class quality for all customers.
Â
Plug-in Type Cassette PLC Splitter
PLC Planar Waveguide Optical Splitter (PLC Splitter) is an integrated waveguide optical power distribution device based on a quartz substrate. Like coaxial cable transmission systems, optical network systems also need to couple, branch, and distribute optical signals. Need Optical Splitter to realize.
Plc Splitter is one of the most important passive components in optical fiber links. It is an optical fiber tandem device with multiple input ends and multiple output ends. It is especially suitable for connecting the central office and the central office in passive optical networks (EPON, GPON, BPON, etc.) Terminal equipment and realize the branch of the optical signal.
The advantages for PLC Splitter:
(1) Loss is not sensitive to the wavelength of the transmitted light, and can meet the transmission needs of different wavelengths.
(2) The light is evenly split, and the signal can be evenly distributed to users.
(3) The structure is compact and the volume is small, and it can be directly installed in various existing transfer boxes without special design to leave a lot of installation space.
(4) There are many shunt channels for a single device, which can reach more than 32 channels.
(5) The multi-channel cost is low, and the more the number of branches, the more obvious the cost advantage.
Cassette Plc Splitter,Plug-In Plc,Plug-In Type Cassette Plc Splitter,Optic Fiber Splitter
Shenzhen GL-COM Technology CO.,LTD. , https://www.szglcom.com