After many friends bought back the favorite speakers, they would feel that the effect was not as good as that heard in the commercial audition room. They even thought that they changed a set of speakers. Where is the problem? Positioning!
No matter what the space conditions of your living room, you can find a suitable speaker pendulum to get the best results. Here are some of them.
First, the inner side of the axis
Pendulum: First place the speaker between one-third and one-half of the length of the room, then place the speaker as close as possible to the side wall. If the room is too wide, it does not have to be close to the side wall. The inward angle of the speaker is greater than 45 degrees, as shown below.
Applicable conditions:
If your hearing environment is complex, the sound absorption is asymmetrical, the room is too slender, and the sound of your speaker is sharp, the midrange is thin, and the bass is not enough, the following "inside axis method" is believed to help you.
Second, the equilateral triangle method
Pendulum method: The first condition is that the speaker should be at least 1 meter away from the back wall and at least 0.5 meters from the side wall. The second condition is to draw the two speakers and the listening position as an equilateral triangle.
Effect: This is the so-called near-field approach. The advantage is that it can reduce the excessive interference of the four walls of the reflected sound on the direct sound of the speaker, thus obtaining a good sense of positioning and a wide and deep sound field. This is the most versatile, straightforward, and clearest detail.
Third, the wall pendulum method
Pendulum: This is the oldest method of pendulum. Put the speaker close to the back wall, 50 cm or 30 cm from the back wall, 20 cm, you can adjust it yourself. Usually the speaker does not need to project an angle inward.
Effect: When the high frequency is sharp, the intermediate frequency and the low frequency are weak, it can make the intermediate frequency and the low frequency full, and the whole high, medium and low frequency can be balanced. However, it also makes the depth of the sound field shallower and narrower. If you balance the harsh sounds, it is the right way to sacrifice the sound field and seek a good voice.
Four-diamond pendulum
Pendulum: This method is only available in square space. Think of the square space as a diamond, and the speakers are placed on the sides of the diamond against the wall. The diamond-shaped sharp corner behind the speaker and the diamond-shaped sharp corner behind the listening position should be subjected to arc or cylindrical sound wave diffusion treatment, and the second speaker should not be too close to the side wall.
Tips: If the room size of your home is between 10 square meters and 20 square meters, the second regular triangle placement method is recommended. It is recommended to use 5 inches in the size of the speaker to maximize the effect.
We eliminate tooling costs and save customers money by offering hundreds and hundreds of stock overmolds. For highly customized molded cable manufacturing projects, our advanced technology allows us to produce custom overmolds at a price and quality level that clearly sets us ahead of the competition.
Custom molded wire assembly, overmolded IP67/68 connectors assembling,customized waterproofing cable assembly
ETOP WIREHARNESS LIMITED , https://www.etopwireharness.com