Inverter remote controller product introduction
What is the inverter remote controller
At the application site of many inverters, the distance between the motor and the operating room is far. If the inverter is installed on the site, it is not easy for the workers to observe and operate; if it is installed in the operating room, the power line is pulled too far, the cost is high, and it causes interference to the inverter itself and other equipment in the system. For the above applications, we have developed a remote controller product.
The remote controller of the frequency converter is a smart meter that realizes the remote operation of the frequency converter. It remotely controls the start, stop, acceleration, deceleration, forward and reverse rotation of the frequency converter through the RS485 network, and displays the operating frequency, rotational speed, etc. of the frequency converter in real time. information. Single machine communication distance up to 1200M (9600bps), effectively reduce the interference of the inverter.
In this way, the inverter can be installed near the motor and connected to the remote controller of the inverter on the instrument panel in the remote operating room through the shielded communication cable or the wireless module. The operating status of the inverter can be observed and operated in the operating room. In addition, the inverter remote controller can also be connected to an external operation button, manual/automatic switching and monitoring, etc., and can be connected to the computer control system to facilitate the use of the project.
Use examples
Inverter remote controller type and function
Inverter remote controller can be divided into digital and analog based on different communication signals; according to different communication media can be divided into wired and wireless; different communication protocols also have corresponding products. If there is no communication interface or the inverter cannot know its communication protocol, we can connect our remote converter at one end of the inverter. Data is still exchanged between the remote controller and the remote converter in the form of RS485 communication. This can also be used for inverters that do not have a communication port or do not know the communication protocol, and truly realize the function of the universal remote controller of the inverter.