Quadruplex Service Drop, Aluminum Wire Aerial Bundled ABC Cable

 

Aerial Bundled Conductor (ABC) Cables

Application
Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system.

It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.

Caledonian LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance), as a secondary cable (pole to pole) or street lighting.

This over-head cable provides reinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140. It is not flame retardant. But this could be if requested change to a flame retardant cable.

Product basic information:

ModelDescriptionNo. Of conductor × Cross area (mm² )Rated Voltage(KV)
JKV-0.6/1Cu core, PVC insulated ABC cable1× 16~240 2/4× 10~1200.6/1
JKLV-0.6/1Al core, PVC insulated ABC cable1× 16~240 2/4× 10~120 3+K× 10~1200.6/1
JKLHV-0.6/1Al-alloy core, PVC insulated ABC cable1× 16~240 2/4× 10~1200.6/1
JKY-0.6/1Cu core, PE insulated ABC cable1× 16~240 2/4× 10~1200.6/1
JKLY-0.6/1Al core, PE insulated ABC cable1× 16~240 2/4× 10~120 3+K× 10~1200.6/1
JKLHY-0.6/1Al-alloy core, PE insulated ABC cable1× 16~240 2/4× 10~1200.6/1
JKYJ-0.6/1Cu core, XLPE insulated ABC cable1× 16~240 2/4× 10~1200.6/1
JKLYJ-0.6/1Al core, XLPE insulated ABC cable1× 16~240 2/4× 10~120 3+K× 10~1200.6/1
JKLHYJ-0.6/1Al-alloy core, XLPE insulated ABC cable1× 16~240 2/4× 10~1200.6/1

 

Construction

Conductor Aluminium conductor, round stranded compressed (RM).
Insulation XPLE compound, UV-resistant.
Core Identification 1, 2 resp. 3 raised longitudinal ribs on the surface of the cores. The surface of the neutral core should have at least 12 ribs for cross-sections up to 50 mm^2 and a minimum of 16 ribs for cores above 50 mm^2. In the case of five core bundles the surface of the protective core should be smooth.