Qingdao Franck high frequency, T5 energy-saving lamps, spiral high-power energy-saving lamps, U-type high-power energy-saving lamps, T5 to T8, replacement, T5 fluorescent lamps instead of mercury lamps, metal halide lamps, T8 fluorescent lamps practical application site measured power saving 60% - 80%
Summary:
Qingdao Frank T5, U-type high-frequency contract energy management special energy-saving lamps, the actual power-saving rate of mercury lamps, metal halide lamps, T8 fluorescent lamps, ordinary energy-saving lamps in the actual application site is 60%-87.7%. It is now used to replace the actual replacement mode of different kinds of traditional light sources, power substitution ratio, power saving rate, and replacement illuminance improvement rate in different application sites. Organized into articles for reference.
This article only includes: the actual power substitution ratio and the actual power saving rate of the actual application field measurement of some users with accurate measurement and testing technology capabilities.
Limited to on-site tracking and investigation capabilities, other provinces such as Shenzhen, Urumqi, Suzhou, Hubei Jingzhou, Guangzhou and other places, and the application sites in the province such as Yantai, failed to actually track and measure.
Key words: T5—28B energy-saving lamp T5—28C energy-saving lamp 6U—50W energy-saving lamp inductive T8—36W fluorescent lamp 1 2 1 1 high-pressure mercury lamp metal halide lamp direct replacement effective visual illumination actual field measurement actual power replacement Proportional actual power saving rate
1. T5-28B energy-saving lamp directly replaces one of the inductive T8-36W fluorescent lamps: 2 in the Dalian Development Zone, the position of a Japanese company is constant, the lamp holder is unchanged, and the effective visual illumination of the countertop after the replacement is increased by 9.7%. The premise. The power substitution ratio is 1:4.01W or more, and the power saving rate is 75.1%.
Second, T5-28C energy-saving lamps directly replace the inductive T8-36W fluorescent lamp 1 set: 1 in a private enterprise clothing company in Weifang, the height is unchanged, the lamp holder is unchanged, and the effective visual illumination of the working table after the replacement is obviously improved. . The power substitution ratio is 1:3W or more, and the power saving rate is 66%.
Third, T5-28C energy-saving lamps directly replace the inductive T8-36W fluorescent lamps, one rack: one in Qingdao, a Japanese-funded company inspection workshop, the height is unchanged, the lamp holder is unchanged, and the effective visual illumination of the working table is increased by 30% after replacement. Under the premise. The power substitution ratio is 1:2.867W or more, and the power saving rate is 65%.
4. T5—28C energy-saving lamp directly replaces the electronic T8—36W fluorescent lamp 1 set: 1 in a large-scale spinning group dyeing workshop in Qingdao, the height is unchanged, the lamp holder is unchanged, and the illuminance measured by the illuminometer is only low after the replacement work surface. 4Lx, the effective and realistic visual sense of the work surface is bright, clear and comfortable.
The power replacement ratio is 1:1.8W and the power saving rate is 44.5%.
5, 6U-50W energy-saving lamps directly replace high-pressure mercury lamps: in the world's 500 powerful even a tire company at the height of the scene unchanged, the lampshade unchanged, after the replacement of the operating table effective visual illumination increased by 8.9%. The power substitution ratio is 1:8.64W, and the power saving rate is 87.5%.
For example, while maintaining the height, the power substitution ratio is 1:8.64W, and the power saving rate is unchanged at 87.5%. It is also equipped with a special lampshade for Qingdao Frank Frank energy-saving lamps.
The effective visual illumination of the work surface will be increased by three times.
Sixth, 6U-50W energy-saving lamps directly replace metal halide lamps: in Dalian, a large listed state-owned steel company maintained a constant height on the spot, with the use of Qingdao Frank Frank energy-saving lamps. After the replacement, under the premise that the effective visual illumination of the work surface is increased by 25%, the power substitution ratio is:
1:8.1W, the power saving rate is 87.7%.
Seven, 6U-50W energy-saving lamps directly replace high-pressure mercury lamps: in Dalian, a large listed state-owned steel company maintained a constant height on the spot, with the use of Qingdao Frank Frank energy-saving lamps. After the replacement, the effective visual illumination of the work surface is increased by 3 times = 4 times, the power substitution ratio is 1:6.14W, and the power saving rate is 83.7%.
Eight, 6U—50W energy-saving lamps directly replace ordinary energy-saving lamps: in Jiangsu, a foreign-funded bearing company has a constant height at the scene, and the lampshade is unchanged. The effective visual illumination of the countertop after replacement is 98.89% (2 times) higher than that of ordinary energy-saving lamps. Next, the power saving rate is 21.3%.
For example, if the height remains the same, the lampshade does not change, and when the effective visual illumination of the working surface is replaced, the direct replacement of the ordinary energy-saving lamp, the power replacement ratio is:
1:2.525W, the power saving rate is 60.4%.
Such as: keep the height unchanged, the power substitution ratio is 1:2.525W, the power saving rate is 60% unchanged, with the Qingdao Frank Frank energy-saving lamp special lampshade. The effective visual illumination of the work surface will be increased by three times.
Nine, 6U-50W energy-saving lamps directly replace the electronic T8-36W fluorescent lamps: In the field workshop of a large-scale spinning group company in Qingdao, the original T8-36W fluorescent lamps were installed, the total number is 96 sets, and the measured power is 2500W. The ground illuminance was measured with 5 points using a lux table, and the average illuminance value was 82.2 Lx.
With Qingdao Franco 6U---50W split high-frequency contract energy management 11 sets of energy-saving lamps, the measured power is 600W. Matrix layout installation, direct replacement. The ground illuminance was measured with 5 points using a lux table, and the average illuminance value was 155.2 Lx.
After the replacement: the average ground illumination is 88.8% higher than the original electronic T8-36W fluorescent lamp.
On the premise that the average illumination on the ground is increased by 88.8%, the power substitution ratio is 1:4.16W and the power saving rate is 76%.
X. Get detailed information:
1, China Lighting Network and other portals search keywords: T5 energy-saving lamps, Qingdao Frank 2, call: Gsm Tel: 0532-8876 0830
3: Contact: Han Yurong 4, attachment words: T5 energy-saving lamps, split type, integrated, U-type high-power energy-saving lamps, spiral high-power energy-saving lamps, T5 to T8 energy-saving lamps, T5 to T8 fluorescent lamps, replacement, easy to install Type, T5 fluorescent lamp, straight tube fluorescent lamp, ring fluorescent lamp, chandelier, compact fluorescent lamp, industrial lighting, industrial lighting, emergency light, table lamp, grille lamp, guardrail lamp, solar lamp, wall lamp, downlight, ceiling lamp, cast Light, floodlight, explosion-proof light, spotlight, garden light, landscape light, lawn light, street light, street light, Christmas light, flash light, high pressure mercury lamp, high pressure sodium lamp, metal halide lamp, bracket, lampshade, lamp panel ,LED lights,gas discharge lamps,high frequency electrodeless lamps,neon lights, germicidal lamps, violet lights, mosquito traps, ballasts, electronic ballasts, energy saving lamps, fuel saving, water saving, coal saving, solar terms, fans, Motor, pump, boiler, central air conditioner, electric furnace, electric welder, cutting machine, air compressor, reducer, generator, chiller, dryer, crusher, sewing machine, lighting, photovoltaic power generation, wind power generation, reactive power Compensation, injection molding machine, Electrical appliances, power saving devices, DC, three-phase, AC, power, high voltage, low voltage, starters, contactors, transmitters, reactors, transformers, varistors, fuses, brakes, starters, earth leakage circuit breakers, protectors ,controller,relay,regulator,inverter,wire,cable,sensor,air,electrical switch,PLC,capacitor,insulator,thermocouple,terminal,extortion,bearing,valve,numerical,automation,press,punch , machine tools, forging presses, molds, springs, gears, tires, lasers, machining centers, burners, light boxes, steel pipes, steel plates, electrical boxes, control cabinets, instrumentation, acids, alkalis, salt, hydrocarbons, benzene, inks, paper ,lacquer,cloth,yarn,leather,shoe,plastic,rubber,nylon,resin,polymer,knife,fastener,battery,textile,chemical,electrical electrical,electronic,energy,environmental,building,hardware,toy, Medicine, packaging, printing, furniture, office, culture, education, machinery, sports, leisure, jewelry, gifts, communication, clothing, car, safety, protection, food, drink ,Processing Equipment
Qingdao Frank (Microelectronics Co., Ltd.) Qingdao ASIC Design Studio High Frequency Light Source Division Contract Energy Management Mechanism Promotion Department High Frequency Light Source Design Engineer Han Yurong Headquarters Address: Qingdao Economic and Technological Development Zone West Yujiahe Electronics Industrial Park Production Base: Jiaoxi Industrial Zone, Qingdao Jiaozhou Bay Industrial Park E-mail: hanjianrong518@yahoo.com.cn
Tel:0532—8876 0830 Gsm
0.42-1.3 Inch Oled,Oled 0.95 Inch,Oled 1.30 Inch,Oled 1.30 Inch For Air Purifier
ESEN Optoelectronics Technology Co., Ltd, , https://www.esenlcd.com