The forward current is up to 350mA and the forward voltage is up to 4V. The standard brightness when inputting 350mA current is 25,000mcd. Further, the luminous flux was 76.5 to 99.4 lm, and the luminous efficiency was 60 lm/W. The LED component uses InGaN. The luminance half-angle of the emitted light is 60 degrees, and the working junction temperature is at most +120 °C.
The outer dimensions are 6.0 mm × 6.0 mm × 1.5 mm. Now available in volume production, the lead time for bulk purchase is 8 weeks.
It is made of butadiene and acrylonitrile by emulsion polymerization. Nitrile butadiene rubber is mainly produced by low-temperature emulsion polymerization. It has excellent oil resistance, high wear resistance, good heat resistance and strong adhesion.
Its disadvantages are poor low temperature resistance, poor ozone resistance, poor electrical performance, slightly lower elasticity. Nitrile butadiene rubber is mainly used to manufacture oil resistant rubber products.
Our Stress control mastic tape HB1104 can provide stress relief of the electrical field in all MV cables joints and terminations for heat shrink and cold shrink technologies. Application up to 15KV.
We are the professional manufacturer of Electrical Tapes,Insulating Tape and Special Adhesive in China for more than 25 years, if you want to know more information about our company and products, please visit our website.
Butadiene Rubber Belt,Oil Resistant Tape,Oil Resistant Sealant Tape,Oil Proof Tape
CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com