FEATURES
15m, 18m, 20m, 25m, 30m, 35m high mast lighting pole
WE ARE MANUFACTURER SINCE 2000
Experience: Our company was set up in 2000, having over 14 years of production experience in galvanized street light poles.
Production Capacity: We manufacture galvanized street light poles from 3M-35M at the capacity of 20,000 poles per month.
Production lines: For galvanized street lighting poles we carry on vertical production to get good control of quality and cost
PAKAGAING
Bulb wrappings for street lighting poles for FCL goods, felt wrapping first and then bulb wrappings for LCL street light poles.
SPECIFICATION
Material: High-quality steel Q235/SS400 from BAOSTEEL Group
Welding Technique:Automatic submerged arc welding
Surface Treatment:Hot dip galvanizing and powder painting
Welding Standard: GB11345 Grade II
Thickness of Zinc Coating :≥ 86um
Adhesive Force of Zinc Coating: GB2694-88
Anti-wind Capacity: 36.9m/s
Anti-corrosion Lifetime: ≥20 years
Coating Layer Thickness : ≥100um
Adhesive force :GB9286-880 Hardness ≥2H
Steel Pole Height Options:3.5m~15m
Street Lighting Poles Type Options: Conical, polygonal
Specifications
Â
Height |
From 18 m to 50m |
Suit for |
Airport ,seaport, plaza, stadium, square, highway station, street way ,etc |
Shape |
Round, Multi-pyramidal, Column form, polygonal or conical |
Material |
Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 |
Torrance of dimension |
+- 2% |
Lighting Source |
400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m² |
Light plate |
Various figure of selection ,material with hot dip galvanization steel frame |
Lifting system |
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut |
Electric appliance control device |
Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Joint of Poles |
Insert mode, inner flange mode, face to face joint mode . |
Design of pole |
Against earthquake of 8 grade |
Wind Speed |
80 Km/Hour |
Welding |
We has past flaw testing. Internal and external double welding makes the welding in shape |
Thickness |
6 mm to 20 mm |
Production Process |
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging |
Packages |
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required |
Delivery Time
Generally 20 working days for 100 sets galvanized steel light poles.
We have plate cutting line--plate bending line-- auto. welding line--polishing line--spray painting line--packaging line
FEATURES
15m, 18m, 20m, 25m, 30m, 35m high mast lighting pole
WE ARE MANUFACTURER SINCE 2000
Experience: Our company was set up in 2000, having over 14 years of production experience in galvanized street light poles.
Production Capacity: We manufacture galvanized street light poles from 3M-35M at the capacity of 20,000 poles per month.
Production lines: For galvanized street lighting poles we carry on vertical production to get good control of quality and cost
PAKAGAING
Bulb wrappings for street lighting poles for FCL goods, felt wrapping first and then bulb wrappings for LCL street light poles.
SPECIFICATION
Material: High-quality steel Q235/SS400 from BAOSTEEL Group
Welding Technique:Automatic submerged arc welding
Surface Treatment:Hot dip galvanizing and powder painting
Welding Standard: GB11345 Grade II
Thickness of Zinc Coating :≥ 86um
Adhesive Force of Zinc Coating: GB2694-88
Anti-wind Capacity: 36.9m/s
Anti-corrosion Lifetime: ≥20 years
Coating Layer Thickness : ≥100um
Adhesive force :GB9286-880 Hardness ≥2H
Steel Pole Height Options:3.5m~15m
Street Lighting Poles Type Options: Conical, polygonal
Specifications
Â
Height |
From 18 m to 50m |
Suit for |
Airport ,seaport, plaza, stadium, square, highway station, street way ,etc |
Shape |
Round, Multi-pyramidal, Column form, polygonal or conical |
Material |
Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 |
Torrance of dimension |
+- 2% |
Lighting Source |
400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m² |
Light plate |
Various figure of selection ,material with hot dip galvanization steel frame |
Lifting system |
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut |
Electric appliance control device |
Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Joint of Poles |
Insert mode, inner flange mode, face to face joint mode . |
Design of pole |
Against earthquake of 8 grade |
Wind Speed |
80 Km/Hour |
Welding |
We has past flaw testing. Internal and external double welding makes the welding in shape |
Thickness |
6 mm to 20 mm |
Production Process |
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging |
Packages |
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required |
Delivery Time
Generally 20 working days for 100 sets galvanized steel light poles.
We have plate cutting line--plate bending line-- auto. welding line--polishing line--spray painting line--packaging line
If you are tired of the original back of your phone, you should try our 3D Relief Back Sticker. The Back Skin Protective Film on the back can not only bring you a visual change, but also protect the back cover of the phone itself from scratches and collisions. Real 3D touch, personalized and stylish pattern design. Bring you a perfect experience.
In daily use, it can protect the equipment from scratches, dust, impact and other damage.
Long-lasting anti-scratch effect, significantly reducing dust, oil stains and fingerprint stains.
Easy to install, easy to stick to the back of the phone, and will not damage the original appearance of the phone.
With the Protective Film Cutting Machine, you can install the Back Film on different types of mobile phone back shells, including mobile phones, tablet computers and other electronic products. Customization can be completed in 30 seconds with just one click.
If you want to know more about 3D Relief Back Sticker, please click product details to view the parameters, models, pictures, prices and other information about 3D Relief Back Sticker.
Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about 3D Relief Back Sticker!
3D Phone Sticker, Carbon Fiber Back Sticker, 3D Relief Back Sticker, 3D Printing Back Sticker, Phone Skin,Mobile Phone Back Sticker
Shenzhen Jianjiantong Technology Co., Ltd. , https://www.jjtbackskin.com