A large wave of beautiful women came to Furutech ADL H128, EH008, A1

ADL H128 headset

ADL H128 is Japan's latest Furutech headset, a total of three color combinations, including Silver-Black (silver black), Silver-Brown (silver coffee), Dark Blue (black and blue). H128 evolution from H118, In addition to maintaining the balance and smoothness of the H118, it is further enhanced in terms of dynamics and strength, so that the liveness of the music can be better. The H128 earmuffs can completely cover your ears, making the low-frequency performance better. And make the standing wave and reflection in the earmuffs reduce to reduce distortion. The artificial leather on the earmuffs is quite soft and comfortable to wear. The H128 is a closed moving coil design, the diaphragm is specially customized, with high noise reduction. With low distortion, it uses a large 40mm single body, its magnet is cryogenically treated, and the mini XLR female is rhodium-plated. It uses a very lightweight, very special copper-plated aluminum alloy voice coil. Internal wiring is used. Furutech's products, with a Furutech Alpha-OCC headphone cord, including a Furutech 3.5mm to 6.3mm adapter.

Features

·Dynamic closed-back circumaural headphones

Furutech designed high noise attenuation and low distortion tailor-made diaphragms

·40mm extra-large high-flux α(Alpha) Cryo-treated magnet

·High quality PEEK trembler film

·Ring betweenvoice-coil and diaphragm keeps ultra-high-frequencies in phase

·Sturdy vibration damping aluminum headband

·Excellent transient response from extremely light-weight coils of copper-

Coated specialaluminum alloy wire

·Furutech nonmagnetic rhodium-plated α(Alpha) cryo-treated mini-XLR socket

·Included in package 3.0 meter Headphone Cable & F63(G) Gold- plated 1/8"

(3.5mm) to 1/4" (6.3mm) adapter 1.3 meter iHP-35X high performance Alpha-O

CC headphone cable terminated with Furutech mini XLR and FT-735 3.5mm stereo connector

Specifications

Acoustic Designynamic closed-back

Driver:40mm diameter special high-flux magnet

Sensitivity: 98dB SPL (1mW) at 1KHz

Frequency response: 20Hz ~ 20kHz

Nput Power: 200mW (Max.

Rated Impedance: 68ohm @ 1KHz

Ear pad: Leatherette

Head Band Pressure: 4.5N Approx.

Connector: Nonmagnetic rhodium-plated stereoα(Alpha) mini-XLR socket

Weight: 280g (9.84oz) Approx. (without cable) 320g (11.2oz) Approx. (with cable)

ADL EH008 ear canal earphone

EH008 adopts double moving coil unit, in which the monomer with 8mm bass and 5.8mm high treble are cryogenically treated. The 5.8mm tweeter is titanium diaphragm, which has the capability of high resolution regeneration. Special ABS resin is used to stabilize the monomer, carbon fiber is used on the outside, and it has very good damping characteristics. A rubber and silicone rubber is added to enhance the sound isolation and wear. Comfort in time. Three sizes of earplugs will be attached to the headphones.

Specifications

Acoustic Design: Dual Dynamic Driver

Driver: : 8mm and 5.8mm α (Alpha –Cryo treated)

Sensitivity : 100±3 dB SPL (130mW input at 1 KHz )

Frequency response: 20Hz ~ 20kHz

Input Power: 2mW / 5mW (Max.)

Rated Impedance: 19 ohm @ 1KHz

Left and right balance: ≦3dB, @ 100Hz and 1KHz

Connection: α (Alpha)–OFC conductor wire with 24k gold-plated stereo α (Alpha) 3.5mm angled plug

Weight: 15g (0.53oz) Approx. (cord and plug included)

ADL A1 DAC/ear spread (DSD 5.6MHz, Android digital decoding)

ADL is a portable DAC and ear extension, supporting DSD decoding (5.6M), its USB Mini-B can be connected to PC/Mac for decoding, and can be charged, USB-A is for Android system. Through the wire of OTG (On The Go), the Android mobile phone digital output can be directly output to A1 decoding, in addition to the optical fiber and analog output, a 3.5mm headphone output. The built-in battery lasts 7.5 hours, fully charged It takes about 5~5.5 hours.

Specifications

High-performance CIRRUS LOGIC CS4392K 24bit/192kHz DAC chip (accepts PCM data and DSD audio data )

Controller supports ASIO and Asynchronous mode

VIA VT1736 32bit/192kHz USB chip , USB 2.0 High Speed ​​compliant accepts DSD 2.8M or 5.6M signal & 44.1 /48 /88.2 /96 /176.4 /192 kHz sampling rates supported

TEXAS INSTRUMENTS TPA6130A2 Headphone Amplifier chip -TPA6130A2 high fidelity Stereo Headphone Amplifier with an SNR of 98 dB

OP AMP: TI- LME49726 High Current, Low Distortion, Rail-to-Rail Output Audio Operational Amplifier

Max Headphone Output Levels (at 1% THD 1KHz): 70mW (12 ohm), 80mW (16 ohm), 65mW (32 ohm), 38mW (56 ohm), 9mW (300 ohm)

Charge Time: approximately 7 hours approx. (DC 5V, 0.5A USB bus power)

Charge Time: approximately 5~5.5 hours approx.(AC/DC 5V, 1.0-2.0A switching adaptor)

Music Playback Time: Up to 7.5 hours when fully charged

Size: 68(W) x 118(D) x 16.5(H)mm

Weight: 150g approx.