Cat 6A Shielded 7FT Grey Patch Cord

Why Choose Us:

1. We are a professional factory owning complete production lines, from cable production, plug production to finished patch cord.
2. We have more than 10 years experiences in this industry.
3. 100% component test by DSX-5000 fluke tester is very matured in our factory.
4. We own international quality certifications like UL, ETL, ISO, RoHS etc.
5. We provide prompt and professional pre sales and after sales services to support our customers.

Specifications:

1, The Category 8 cabling standard:ANSI/TIA-568-C.2-1 Addendum 1
2, Two types:Cat 8.1 supports 25G Base-T application and Cat 8.2 for 40G
3, Permanent link maximum length of 24 meters and whole channel 30m
4, No UTP(unshielded)cable solution used
5, Patch cord cable Gauge:22-26AWG
6, Fluke tester DSX-8000 has been launched in February of 2017


GYA, professional structured  cabling manufacturer. We only focus on design, develop and produce full series of Cat.5e, Cat.6, Cat.6A, Cat.7 patch cords, and design connectors for our own. Our team has more than 10 years technology and management experiences. Compared to other manufacturer, we are very proud to say: We do more refined and professional.

Our products are compliant with ETL, UL, ISO, RoHS etc.. Our excellent quality is approved by famous brands in domestic and abroad. Based on providing high quality, we also strive to offer most competitive price/quality ratio. We work with customers closely at technology field, and always stand in front of this industry.




  Packing Rate:

Why Choose Us:

1. We are a professional factory owning complete production lines, from cable production, plug production to finished patch cord.
2. We have more than 10 years experiences in this industry.
3. 100% component test by DSX-5000 fluke tester is very matured in our factory.
4. We own international quality certifications like UL, ETL, ISO, RoHS etc.
5. We provide prompt and professional pre sales and after sales services to support our customers.

Specifications:

1, The Category 8 cabling standard:ANSI/TIA-568-C.2-1 Addendum 1
2, Two types:Cat 8.1 supports 25G Base-T application and Cat 8.2 for 40G
3, Permanent link maximum length of 24 meters and whole channel 30m
4, No UTP(unshielded)cable solution used
5, Patch cord cable Gauge:22-26AWG
6, Fluke tester DSX-8000 has been launched in February of 2017


GYA, professional structured  cabling manufacturer. We only focus on design, develop and produce full series of Cat.5e, Cat.6, Cat.6A, Cat.7 patch cords, and design connectors for our own. Our team has more than 10 years technology and management experiences. Compared to other manufacturer, we are very proud to say: We do more refined and professional.

Our products are compliant with ETL, UL, ISO, RoHS etc.. Our excellent quality is approved by famous brands in domestic and abroad. Based on providing high quality, we also strive to offer most competitive price/quality ratio. We work with customers closely at technology field, and always stand in front of this industry.




  Packing Rate:

SD Card Connector

Antenk extended its connector product range by SD card connectors. As already mentioned there are various applications, in the past driven by the computer industry, which are using memory cards as well in their end products, single sided pressure contact connectors can be designed and manufactured according to a customer specific requirement based on customer dedicated insulator- and contact dies. Such single sided pressure contact connectors are mainly used as board to board connection on the base of direct contact to the pads on the board.

Compact Flash Card Connector Overview

Store More Memories
Compact Flash storage cards are small, removable, mass-storage devices. They electrically comply with Compact Flash Association standards, the PC Card ATA standard, and run in True IDE mode. These 50-position cards typically hold between 32 MB and 2 GB of memory and are about the size of a matchbook. Antenk`s connectors include headers that can accept Type I (3.3mm thick) or Type II (5.0mm thick) storage cards, flush and raised mounting heights, and ejectors. Antenk Compact Flash card connectors also provide electrostatic discharge protection.Adapter for Compact Flash Card type I and II
Available with various ejectors
Different stand offs heights
Reverse type without stand-off height is not applicable to Compact Flash Card Type II

Compact Flash Card Connector Specification
Insulation Resistance: 1000MΩ at 500V DC
Withstanding Voltage: 500Vrms
Current Rating: 1A AC/DC max.
Contact Resistance: 40mΩ max. at 20mV max.
Operating Temp. Range: -55°C to +85°C
Reflow Solder Temp.: 220°C min. / 60 sec, 260°C peak
Mating Cycles: 10,000 times
Materials and Finish
Insulator: LCP, glass filled (UL94V-0)
Push Button: Glass reinforced PBT (UL94V-0)
SMT Metal: Brass, pure Sn
Pivot Shell: Stainless Steal
Contacts: Brass
Plating: Contacts - Gold (15µ[) over Nickel (40µ[), Solder Tails - pure Sn

Compact Flash Card Connector Product Features
Compact Flash Connectors
Robust surface-mountable designs
Proven PCMCIA contact technology
Accepts hardware for mechanical mounting
Top- and bottom-mounting styles
Right-angle and vertical orientations

Compact Flash Connectors Applications
Desktop and laptop computers
Digital cameras
Smart phones
Data recorders
Slot machines
Industrial and embedded computers

SD Card Connector,Tf Card Connector,Sd Card Connectors,Natural Cf Card Connector,Compact Flash Card Connector,CF cards types I/II,CF Card connector MA type Adapter,CF Card connector MA type Ejector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com