Epoxy floor paint construction and maintenance methods

For the epoxy floor to have a good surface finish and aesthetic effect, Weifang floor paints for construction and maintenance are recommended as follows:

First, the construction environment:

1. Base surface moisture content: When it is more than 6% , non-water-borne epoxy floor can not be constructed; 2. Humidity in the air: The construction should be stopped at more than 85% ; 3. Construction temperature: less than 5 °C should use special formula.

Second, the construction method:

Surface grinding, crack repair → epoxy primer → scrape epoxy mortar layer → epoxy putty → epoxy paint layer → epoxy cover layer

Third, maintenance requirements:

1. Do not abuse the machine . Try to avoid excessive knocking on the ground. Do not hit the ground with very heavy or hard objects. Unless necessary for work, avoid frequent unnecessary wear. Especially for the ESL floor, in order to maintain its smoothness, beauty and appearance, special attention should be paid to avoiding traffic such as steel wheels; do not have heavy traffic and loads, and avoid contact with the ground to avoid scratches.

2. Surface cleaning , epoxy floor surface cleaning method is simple, generally scrubbed with water. If the stains are washed clean, use a cleaning agent, industrial degreasing agent, detergent, etc., and then rinse with water. For quite stubborn stains, mechanical cleaning methods can also be used, but do not put pressure on the ground, wear too much to affect the leveling and luster of the ground.

3. Avoid chemical pollution

  4. All personnel entering the workshop must change their shoes ( so as not to scratch the ground when the mud is thrown into the workshop );

5 , all hardware: such as iron chairs, iron tables, iron shelves, etc., must be wrapped with soft plastic or rubber feet to avoid scratching the ground during use ;

6. When cleaning the floor, please use a soft mop or a wet or dry vacuum cleaner, which can be cleaned with water or detergent, but please note that the floor is slippery ;

7, Please use rigid or elastic rubber wheels for the wheels of the carts and carts, and use them separately inside and outside the workshop ;

8, If it is used for a long time, it will cause wear or scratches, and a small area can be repaired. If the area is large, it is recommended to re-roll it once .

Weifang Nadi Floor Engineering Co., Ltd. Main: Weifang epoxy floor paint , epoxy floor paint, epoxy mortar floor paint, epoxy self-leveling floor paint, corundum wear-resistant floor, concrete seal curing agent, etc. Hardened floor paint. To undertake all kinds of workshop floor, parking lot floor and wear-resistant floor engineering

Contact: Manager Zhou

Contact information: 13396364799   0536-7361556

Company website: