France Type CAT6 UTP Type Keystone Jack

1, Housing : high temperature thermoplastic 
2, Covered with metal that provides well anti-EMI performance 
3, Contract : phosphor bronze , phosphor bronze, gold plate . 
4, Available in Cat 5e,T568 A ,T568 B wiring .meeting every cabling requirement 
5, Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mm 
6, Easy to be terminated Low attenuation loss and high return loss . 
7, High reliability and superior performance .
We also have 76561,76562,76563,76564,76566,78730,78731,77210,77214,77218,33561,33563,32755,32759.
 
Meet TIA/EIA-568-A and TIA/EIA-568-B Category 6 requirements.
Meet TIA/EIA TSB-40 Meet ISO/IEC Generic Cabling Standard 11801
Meet CENELEC Generic Cabling Standard EN50173
Angle:180 Degree Electrical: According to UL 1863
Current rating:1.5 Amp
Max. Voltage rating:150 Volts
Contact resistance:20 m-ohm
Insulation Resistance:500M-ohm
Dielectric Withstand Voltage:1000 V AC RMS,60Hz 1min Materials: Housing:PC UL94V-0 IDC:PC UL94V-0,Accept 22-26 AWG Solid Wire. PCB:FR4 1.6mm(0.04")thickness
Contact:PC Ul94V-0,0.45mm(0.018") Diameter Phosphor bronze with 3 " to 50 U"Gold plating on contact area.
  1, Housing : high temperature thermoplastic 
2, Covered with metal that provides well anti-EMI performance 
3, Contract : phosphor bronze , phosphor bronze, gold plate . 
4, Available in Cat 5e,T568 A ,T568 B wiring .meeting every cabling requirement 
5, Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mm 
6, Easy to be terminated Low attenuation loss and high return loss . 
7, High reliability and superior performance .
We also have 76561,76562,76563,76564,76566,78730,78731,77210,77214,77218,33561,33563,32755,32759.
 
Meet TIA/EIA-568-A and TIA/EIA-568-B Category 6 requirements.
Meet TIA/EIA TSB-40 Meet ISO/IEC Generic Cabling Standard 11801
Meet CENELEC Generic Cabling Standard EN50173
Angle:180 Degree Electrical: According to UL 1863
Current rating:1.5 Amp
Max. Voltage rating:150 Volts
Contact resistance:20 m-ohm
Insulation Resistance:500M-ohm
Dielectric Withstand Voltage:1000 V AC RMS,60Hz 1min Materials: Housing:PC UL94V-0 IDC:PC UL94V-0,Accept 22-26 AWG Solid Wire. PCB:FR4 1.6mm(0.04")thickness
Contact:PC Ul94V-0,0.45mm(0.018") Diameter Phosphor bronze with 3 " to 50 U"Gold plating on contact area.
 

Solder Cup Waterproof D-Sub Connector

The Solder Cups D-sub connector, also known as Solder Cups D-sub connector , typically contains a pin layout of 9 pin, 15 pin, 25 pin, 37 pin & 50 pin positions housed in increasing shell sizes accordingly. They are available in both male (plug) and female (socket) variants with the male signal contacts/pins (current rating of 5A) spaced every 2.76mm in horizontal rows and the spacing of rows vertically at 2.84mm laid out half the distance between pins of existing rows.

IP66 IP67 Rated Waterproof D-Sub Panel Mount Solder Connectors
Harsh outdoor or indoor environments can destroy electronic equipment. Standard D-sub connectors are not intended to withstand contaminants such as water and dust. These waterproof solder cup connectors are available in male or female genders and DB9, DB15, DB25, and HD15 sizes. They will accommodate wire ranges from 30 - 20 AWG. Construction features gold plated brass contacts, nickel plated steel shells, and a silicone insulating ring. Maximum recommended panel thickness is 0.078".

Antenk offer a wide range of waterproof standard density and high density male and female high density D-Sub connectors solder cup with stamped and formed Contacts in cable mount used in a variety of demanding applications.

Antenk's Solder Cup D-Sub Connectors Stamped contacts

FEATURES

Solder cup d-subs available in industry sizes/positions

Low cost economy series.

Nickel shells have indents to provide grounding and additional retention.

Low cost & high performance, non-removable stamped contacts.

Optional mounting hardware available.

Antenk's SOLDER CUP D-SUB CONNECTORS Stamped contacts

MATERIALS

Shell: Steel, Tin or Nickel Plated

Insulator: Glass-filled thermoplastic. U.L. rated 94V-O

(230°C process temp)

Stamped contacts: Male pins - Brass | Female pins - Phosphor bronze

Plating: Gold flash on entire contact (contact us for other plating options)

Solder Cup Waterproof D-Sub Connector Stamped & Formed Contact, Solder Cup Waterproof D-Sub Connector Machined Contacts, Waterproof Panel Mount Solder Cup D-Sub Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com