[Home Theater Network HDAV.com.cn] HIFI audio set up, this kind of problem is really a headache for enthusiasts, and forums often have such consultations, so the following discussion may be able to give some fans reference and help.
But still have to emphasize that the following discussion is only a personal opinion, a statement of the family. (This post will be updated from time to time, because the content involved will be very extensive)
As for the content involved, it is possible to tentatively index several outlines.
1) Proportion of input of major audio parts
2) Audio style purchase and equipment introduction under different price points
3) Understanding and using accessories in audio matching debugging
4) Music or audio fever?
First, the proportion of audio input
This topic, I believe that the conclusion will be varied, and indeed there is no definite solution. However, in order to give some initial introductions, and even some old burning more reference opinions, it is also a good reference information to set an investment ratio for each major audio input.
To this end, first of all, audio music lovers will be divided into different levels---this division, emotionally, there will be no prejudice. So everyone can check in on their own, but don't have any other ideas...
1) Audio-visual enthusiasts, which belong to the quasi-fever stage of HIFI fever, even the first brother is not, the audio input will be between 10,000-30,000
For these friends, their focus on audio production is to have a more comprehensive sound system that can watch movies. This type of audio combination, investment ratio recommended 4:4:2:0 (speaker + amplifier + audio + wire)
Comments: The speakers are equal to the amplifier, and not enough speakers will not get enough performance. Friends at this level, do not have too many concerns or pursuits in the wire, because friends at this stage, usually the sound system debugging is not fine, the individual listening level is also in the coarse food type, so sensitive to wire and accessories Not enough (not the reason for the equipment)
2) Primary enthusiasts, commonly known as the first brother (some people may not like to listen to this, but this positioning is more appropriate), the investment is also between 10,000-30,000
Such friends, the formation of fever audio, is to come to the fever, so full of enthusiasm, full of confidence, but due to experience and other reasons, the choice of audio is the most confused, but also the most urgent need for help, but at the same time is the most Easy to be fooled.
At this stage of equipment purchase, investment ratio I provide two programs for reference: [1] popular type 4:4:2:1 (speaker + amplifier + audio + wire) [2] side heavy 3:5:2 :1 (Deliberately setting the ratio over 10 points means that you consider the investment on a 10-point scale, and the over-spending part is used for the wire)
Comments: The universal investment, the quality of each piece of the piece is guaranteed, and in the absence of sufficient experience to control the debugging, the effect will not appear to be biased. The side heavy, it emphasizes enough total control energy, so the sound effect with the combination usually has a superb performance - and this will have higher requirements for the fans
3) Intermediate enthusiasts, this is the mainstream of enthusiasts, usually called enthusiasts. The total audio input is between 30,000 and 100,000
The audio input solutions at this stage are completely varied. There is no law at all. They are usually combined on demand and combined according to personal taste. At this stage, the focus is on the selection of speakers (focusing on but not necessarily spending the most), the input of the speakers is between 10,000 and 30,000, and then the amplifier is selected as the axis, and the input is in 3 Between 50,000 and 50,000, the sound source is positioned between 1-3 million, and the wire is about 10,000.
Comments: The fever at this stage is the pursuit of quantity or the pursuit of quality? This is inconclusive. In pursuit of the amount of friends, you can invest more in the speaker, such as 3-5 million; and the pursuit of quality fans, may wish to focus on the selection of the amplifier, the performance of the speaker to the fullest! This is actually It involves the bookshelf and the floor, the big horn and the small horn, the horn or the amp, and so on. This is really inconclusive, and I hope to pursue my own preferences.
4) High-end enthusiasts, this is a fan of high-class equipment, the total audio input is between 100,000-200,000
The investment plan at this stage will be relatively fixed. Almost 3:3:3 is the best ratio. However, the wire investment at this stage is very wonderful. It is not an exaggeration to invest in the amount of 2~4. Will be worth the money (for this, ordinary fans do not mix)
Comments: For high-end equipment, all major pieces must have the same quality, otherwise there will be a worry. At this level, the wire tends to have a bottleneck. It is like a BMW sports car. You give it garbage oil and tires. Can you still run it? The wire at this time is far from being as simple as the icing on the cake. Many times, it is a lifeline! (More exaggerated than the first-line upgrade), therefore, seeing a lot of fans around, crazy for the front line, it is already strange.
5) Old burning, this is a specific group, which is divided from the perspective of experience and level, not how much to invest. Their investment span is very large, ranging from 50,000 to 300,000. The proportion of such enthusiasts is completely individualized and not universal. However, they study their purchase intentions, they pay special attention to speakers and sound sources, and often the most input is the sound source! This piece has not been studied.
Comments: Old burning, they have their own understanding of the sound, is the understanding of years of precipitation and crystallization, so what they pursue are high quality and tasteful, and the concept of ordinary fans is not the same. They pay the most attention to the sound source, including LP, and they also pay attention to all aspects and details of the audio, such as the environment, wire, accessories, etc., are very particular, and in their hands, these things are indeed very magical, affecting Significantly---this point, the old burning is personal experience and come from practice, their input and gameplay are often not understood by many people, I hope that everyone will still compare their own level and positioning, play with each other, Old burning is also a burning friend, and their money is not, and will not be squandered.
Of course, there are still some local-level fans, 3-5 million or more, will not say
..................to be continued
More fresh and fun home theater information, please pay attention to home theater network http:// (WeChat: cnhifi), the country's most influential home theater audio player interactive media website.
Note: The author of this article is ABing. Copyright statement: The copyright belongs to the original author. If copyright issues are involved, please contact the original author and deal with it immediately. The article is an independent view of the author and does not represent the position of the home theater network.
Cross arms are a kind of angle iron fixed on the telegraph pole,it is a important part for pole the tower, it is used to install insulators and power fittings in order to supporting the wire and lightning conductors, whichsteel Cross Arm make them keep safe distance between them each other by rule. Cross arm is generally installed at 300mm from the top of the pole, and the Insulation Cross Arm should be installed on the receiving side, while the cross arm on the corner pole, the terminal pole and the branch pole should be installed on the guy wire side.
Parameters
We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.
Cross Arm
Crossed Arms,Steel Cross Arm,Insulation Cross Arm,Cross Arm
FUZHOU SINGREE IMP.& EXP.CO.,LTD. , https://www.cninsulators.com