The intelligent water dispenser is a kind of energy-saving drinking water platform. It is mainly installed and applied in various public and commercial occasions. It is suitable for water supply and drinking water in schools, factories, offices, airports, stations, hospitals, chain restaurants, restaurants, hotels and other occasions. The atmospheric pressure type intelligent water dispenser is equipped with advanced filtering device, which can effectively filter out residual chlorine, bacteria, sediment, rust, heavy metals, colloids and other impurities in the water to ensure the drinking water is hygienic, and then heat the water to boil, to achieve the standard of direct drinking. In line with the requirements of Chinese drinking water. Such a filter-type drinking water platform is different from a bottled water drinking platform and a conventional electric water heater, and is a novel drinking water device, which is widely used because of its high energy-saving and environmental protection effects and safety and durability.
Intelligent water dispenser features1) A heat exchanger specially equipped inside can save about 80% of electricity.
2) Intelligent water control device, only water can be opened to drink water and drink safely.
3) Whether it is boiling water or warm water, it will be filtered and will be effluent after efficient sterilization.
The working principle of the intelligent water dispenser is the principle of refrigeration:1) First turn on the cooling switch of the smart water dispenser, and see that the power light is on, then the compressor works.
2) The compressor sucks back the hot air that has been absorbed from the evaporator, is again compressed to a high temperature, and is sent to the condenser.
3) Such refrigerant vapor is radiated to the outside through the condenser, and then depressurized through the energy-saving tube and then flows into the evaporator, so that the water temperature is lowered, and thus the circulation is formed without interruption.
4) When the water temperature has dropped to the set temperature, the thermostat will automatically disconnect and then switch to the heat preservation mode.
Heating principle:1) Turn on the heating switch of the smart water dispenser, and then start the work.
2) When the water temperature reaches the set temperature, the thermostat will automatically disconnect, then the indicator light will go out and enter the heat preservation state.
3) When the water temperature of the intelligent water dispenser gradually drops to the set temperature after the power is cut off, the thermostat will automatically start working, turn on the power, the indicator light will be on, and the heating will be cycled again.
4) Intelligent water dispensers are equipped with power-off protection devices. When the circuit is overheated, it will automatically power off when sleeping. It is very safe to use.
Intelligent water dispenser unique featuresThe intelligent water dispenser is small in size and flexible in installation. It does not affect the use of the original faucet, nor does it damage the original decoration. The smart drinking water has a small body material but its function is not less than 5 filters. The smart water dispenser does not need to be washed. The integrated disposable filter element is easy to replace and avoids secondary pollution. The activated carbon in the intelligent water dispenser is different from other activated carbons. It adopts high polymerization technology to pass ultrafine powdered activated carbon through special polymer materials. Re-sintering and polymerizing into compact activated carbon rods, greatly improving the content and effectiveness of activated carbon, and effectively removing heavy metal pollution. It is worth mentioning that the intelligent water dispenser uses medical grade pleated membrane filtration technology to completely remove spores from water. The capsule and bacteria retain the original mineral elements in the water to ensure the clean and safe water. The smart water dispenser is different from other intelligent water dispensers in that it does not need a pressure relief valve. The water body loses water pressure less than 1Gps through the intelligent water dispenser. The water pressure is very small, so don't worry about the filter film exploding.
The function of the intelligent water dispenser is as follows: 1) The main function of the intelligent water dispenserThe intelligent water dispenser has overheat protection against dry burning, heating to boiling, setting temperature heating, over temperature alarm prompt, safety lock, motor water discharge function and so on.
b) Key function of smart water dispenser1, the water button: control the water dispenser water and stop the water;
2, heating button: responsible for controlling the start of heating and stop heating;
3. Lock button: press the lock button, other buttons are invalid;
4, switch health: press to start setting the temperature the user wants;
5. Temperature setting button: Press the temperature to increase by 5 °C, and the temperature can be cycled between 0 °C and 100 °C.
c) Display function of smart water dispenser1. Power light: Turn on the power and the power light is on.
2. Heating indicator: Press the heating button, the heating indicator lights up, indicating that the boiling water starts to work. Press the heating button again, the indicator light goes out, indicating that the water is stopped.
3. Lock button indicator: Lock other button functions, the light is on to indicate that other buttons are unavailable.
4. Over-temperature warning light: When the light is on, it indicates that the water has reached the set heating temperature or has boiled and stopped heating.
5. Digital tube: display the current water temperature or the temperature set by the user.
6. Buzzer: After the sound is heard, the water is boiled and the heating is stopped.
Smart water dispenser priceThe first type is fine filtration, which is often referred to as a pure water machine. It can kill all the bacteria in the water, and at the same time remove most of the impurities in the water. Only the water molecules are filtered out. This filtering method is most effective in removing the salty taste in the water. It can be drunk directly from the tap. Usually it is between 1000 yuan and 3,000 yuan, and it needs to be plugged in.
Wireless Battery Par Lights Series
It is built with D-Fi transceiver. This wireless battery led light can be controlled by wireless DMX or IR remote controller. It's convenient for home parties, events, and any other places requiring a small fixture lighting up the venue. Shine light where it is needed using the built-in adjustable kickstand and prevent light spillage with the built-in glare shield.
DMX cables can be removed, wireless connection is available without any signal interference. With in-built lion battery, power cables can be removed, each light can be placed seperately without any cable connection, while they are wirelessly connected for the controlling. The charging time is about five hours, while working time reaches 8-12 hours. It is small in size: 15*14*23cm, stuitable for lighting up a truss.
Our company have 13 years experience of LED Display and Stage Lights , our company mainly produce Indoor Rental LED Display, Outdoor Rental LED Display, Transparent LED Display ,Indoor Fixed Indoor LED Display, Outdoor Fixed LED Display, Poster LED Display , Dance LED Display ... In additional, we also produce stage lights, such as beam lights Series, moving head lights Series, LED Par Light Series and son on...
Wireless Battery Par Light Series,Beam 230 7r,Stage Beam Light,Moving Head Stage Lights
Guangzhou Chengwen Photoelectric Technology co.,ltd , https://www.cwstagelight.com