First, the size: 76.2 * 24 * 13mm
Second, the weight: only 13g
Third, the main interface introduction:
1, S.BUS signal input interface x1;
2. S.BUS signal output interface x1;
3, PWM interface x8;
4, high and low level output interface x4;
5, relay port x2;
6, serial communication interface (TTL) x1;
Description of each port
Left port description
Right port description
Instructions for use:
1. The module adopts 5V power supply. Due to the limitation of the module power supply, this module can not supply power to other modules that need high current (such as steering gear, need to be powered separately); the maximum control current of the relay is 1A;
2. The module can realize S.BUS to PWM and I/O output: convert the standard S.BUS signal into 8 PWM outputs, 4 I/O outputs and relay control signals. These signals can be used to control the unmanned Machine, task load, lighting and turning off indicator light, retracting tripod, opening umbrella, cutting off flight control power supply, etc.; and the 13 outputs can be configured as ordinary remote control through the onboard serial communication interface with corresponding commands. Any of the channels;
3. The module can realize PWM to S.BUS output: collect 8 PWM signals and encode them into standard S.BUS signals through S.BUS output port output;
4, the indicator description:
Under normal circumstances, the power-on red indicator light is always on; the green status indicator has three flashing modes:
Flashes once every 2 seconds (slow flash): PWM to S.BUS mode;
1 second flash (second flash): S.BUS to PWM mode;
Five times in 1 second (flash): Configuration mode.
New product hotline
400-9900-385
What is a slip ring?
A slip ring is an electromechanical device that allows electrical current to flow through a rotating assembly. It is often used in conjunction with a commutator to create an electrical connection in a rotating system. The device consists of a number of contact rings mounted on the rotating assembly and two or more stationary contacts. When the rotating assembly is rotated, the contact rings pass by the stationary contacts, creating an electrical connection.
Types of slip rings
A slip ring is an electromechanical device that allows the transmission of power and electrical signals through a rotating assembly. Slip rings are commonly used in applications where it is not possible or practical to make a permanent electrical connection, such as on a rotating antenna, wind turbine, or radar dish. There are many different types of slip rings available, each with its own set of benefits and drawbacks. Some of the more common types of slip rings include fiber optic slip rings, rotary unions, and contactless slip rings.
Advantages of custom slip rings
When it comes to slip rings, custom-made ones have a lot of advantages over the standard, off-the-shelf variety. Custom slip rings are designed specifically for your application, so you can be sure they`ll meet all your needs. They`re also made to order, so you can get exactly the features you want. And because they`re made specifically for you, they`re often less expensive than generic slip rings.
Disadvantages of custom slip rings
In many industrial and commercial applications, a custom slip ring is the best way to transfer power and/or data between two systems. While custom slip rings offer many advantages, they also have some disadvantages. In this article, we will discuss the disadvantages of custom slip rings.
One disadvantage of custom slip rings is that they are often more expensive than other types of electrical connectors, such as wire harnesses or connectors. Additionally, custom slip rings can be difficult to install and may require specialized tools. Another disadvantage is that custom slip rings are not always as reliable as other types of electrical connectors. They can fail prematurely if not properly maintained or used in the correct application.
Conclusion: When to use a custom slip ring
A custom slip ring is an electromechanical device that allows for the transmission of electrical signals and power between rotating and stationary components. The use of a custom slip ring can be beneficial in a number of ways, including improved performance, increased efficiency, and longer life. In some cases, a custom slip ring may be the only option available for achieving the desired results. When considering a custom slip ring as an option for your application, it is important to understand the different factors that will impact its performance.
Custom Slip Ring,Rotary Joint Price,High Pressure Rotary Joint,Moflon Rotary Union
Dongguan Oubaibo Technology Co., Ltd. , https://www.sliproubos.com