ON Semiconductor automotive LED lighting driver and solution

Introduction: LEDs can be used in all parts of automotive lighting, from headlights to fog lights, instrument backlights to mirror lighting, taillights, interior lighting, etc. Anson offers a range of standard lighting analog products such as NCV3065 and discrete devices. For example, the NSI45 series, as well as a series of products acquired by AMIS, such as ASSP, provide professional automotive-grade lighting solutions for different lighting subsystems.

With the development of the automotive industry, more and more advanced lighting technologies are gaining more applications in automobiles. Among them, LED lighting has the advantages that halogen lamps and xenon lamps can't match, such as long life, fast response time, energy saving and environmental protection, etc., which accelerates the pace of adoption in automobile lighting.

ON Semiconductor offers a broad lineup for automotive headlamp lighting applications, from general lamp driver solutions to stepper drives, LED drivers and xenon lamp drivers, with continuous commitment to automotive headlamps, dashboard backlighting, and interior lighting. Automotive lighting applications such as door lighting and taillights offer a wide range of solutions, including standard and custom products, especially in the market for headlamp adjustment, xenon lamp drive ASICs for deflection and stepper drives that are the de facto standard.

Various types of product features and overall solutions

ON Semiconductor's linear regulators for low-circuit applications, such as 20mA LEDs, have a low total power consumption and can operate in a 85-degree environment with low system integration, such as the CSI or NUD series of the NSI45 series. Meet such requirements;

For the switching regulator, it is characterized by high LED power, can reach about 700mA, is the total power consumption of medium and high, can work in the environment of up to 125 degrees, its system integration is also low, can be used The NCV3056/66 series realizes its control;

For the lighting management integrated chip, its power is also relatively large, the ambient temperature can reach 125 degrees, is a complete independent subsystem, so the integration will be higher, NCV78663 and NCV7680 are used for this application.

ON Semiconductor automotive LED lighting driver and solution

Headlight driver and position adjuster

First, the front LED lighting. LED front lighting generally requires support from a single LED to multiple LED strings, voltages up to 60V, PWM dimming, high energy efficiency integrated drivers, low EMC emissions from LED strings, and diagnostic and synchronous interfaces. ON Semiconductor's AMIS-30623 single-chip microstepping motor driver is suitable for horizontal adjustment and deflection control of headlamps. It integrates a controller and LIN interface, and uses a LIN host to implement a dedicated mechatronic solution for remote connectivity. The device receives the position adjustment command via the bus and then drives the motor coil to the desired position, using current, speed, acceleration, and deceleration configuration parameters. The AMIS-30623 also detects motor stall conditions.

ON Semiconductor automotive LED lighting driver and solution

Figure 2: AMIS-30623 headlamp level adjustment and deflection circuit

In addition, two devices can also be used for the above applications, NCV70521 and NCV70522 are single-chip micro-stepping motor drivers with current conversion meter and SPI interface. The NCV70522 also includes an embedded 5 V regulator and a watchdog reset function. The device acts as a peripheral driver that accepts the “next microstep” command from the microcontroller and synchronizes the motor coil current to the desired speed. The integrated SPI bus allows parameter setting and diagnostic feedback.

ON Semiconductor automotive LED lighting driver and solution

Figure 3: NCV70522 single-chip microstepping motor driver

Second, advanced LED headlamp power ballasts. ON Semiconductor's NCV78663 single-chip, smart headlamp LED driver enables single-chip control of high beam and fog lamps. The NCV78663 integrates digital dimming, SPI programmable settings, and built-in diagnostics to provide an integrated, energy-efficient integrated headlamp control solution.

ON Semiconductor automotive LED lighting driver and solution

Figure 4: NCV78663 Headlamp Power Ballast

Battery Inverter

ups inverter for home,10kw off grid invertergrid tie solar inverter,hybrid solar inverter,hybrid solar power inverter,solar power inverter for home

EMoreShare International Trade (Suzhou) Co., Ltd , https://www.emoresharesystem.com

Posted on