Wireless emergency button features and installation instructions

The wireless emergency button cooperates with the master control device of the smart home system to realize an emergency alarm signal sent by the home in an emergency situation. The central control host calls an alarm signal to be buried and sends an alarm to the police management center.

1. Features

(1) Small size, easy installation, emergency button can be directly installed in the 86 bottom box.

(2) low power consumption, two 7# alkaline batteries can be used for 2 years; and undervoltage indication function, easy to replace the battery in time.

(3) Suitable for family room and hotel bedroom.

2. Installation and commissioning

(1) Mandatory. Set the function switch to the “forced” position and enter the forced arming status of channels 1 and 2. Do not dispose the disarming command of the master controller.

(2) Registration 1. Switch the function switch to the “SET 1” position and enter the 1-way registration mode. The master control device will perform the registration operation (indicator 1 flashes 2 times per second).

(3) Registration 2. Switch the function switch to the “SET 2” position and enter the registration 2 channel mode. The master control device will perform the registration operation (indicator 2 blinks 2 times per second).

(4) Normal. After the function switch is set to the "normal" position, the wireless emergency button operates in normal mode.

(5) Registration system identification code and unit code

1 Enter registration mode: Set the function switch to "Register 1".

2 Registered system identification code: The corresponding indicator is flashing, indicating that it has entered the setting state. You can use the smart handheld controller and central control host to register the system identification code. When the registration is successful, the buzzer will promptly register successfully.

3 Registration unit code: You can use the smart handheld controller and central control host to register the system ID code. Registered into a buzzer "å“—" prompts a successful registration.

4 If you pass the alarm box, after the registration is completed, you can switch the function switch to the “normal” position (you can also dial the “forced” position as needed).

5 continue to enter the registration mode: switch the function switch to "registration 2" position.

6 Registered unit code: You can use the smart handheld controller and central control host to register the system ID code. When the registration is successful, the buzzer will promptly register successfully.

7 Complete the registration by setting the function switch to the “normal” position (you can also dial the “forced” position as needed).

Related browsing:

Article: Shanghai Smart Lock Brand Leaderboard

Recommended: Karma smart lock to join fingerprint password lock service smart home lock agent