Yunnan Power Grid Co., Ltd. Honghe Power Supply Bureau 35kV Dry Hollow Series Reactor 14 sets of insulation overhaul technical services (non-bidding procurement number: HLZB-2016-12-108) approved by the higher authorities, the required funds have been implemented, by the purchaser Entrusted by the Honghe Power Supply Bureau of Yunnan Power Grid Co., Ltd., it is now planned to open competitive negotiations on the project.
I. Project Overview
1.1 Project Name: Honghe Power Supply Bureau 35kV dry hollow reactor series 14 sets of insulation overhaul technical services.
1.2 Construction Unit: Honghe Power Supply Bureau, Yunnan Power Grid Co., Ltd.
Second, the implementation of funds
2.1 Source of Funds: Self-raised by the company.
2.2 Funding Status: Implemented.
Third, the contents of the negotiations
3.1 Purchase content: This project is a contract bid
The technical personnel of the factory determined by the commission are responsible for the implementation and cooperation of the power transformation management. The PRTR coatings are applied to the above 14 groups of the Honghe Power Supply Bureau and dry hollow reactors. The main contents include the following:
1. Integral inspection of the reactor body;
2. Perform dust removal and ash treatment on the reactor body and ensure that the entire encapsulation surface is dry and clean after dust removal;
3, PRTV coating spraying reactor, the surface of the reactor should be uniform after spraying, no leakage, no bubbles, no sagging, coating thickness 0.3-0.5mm;
4. After spraying the paint, the equipment must be checked again to ensure that it does not affect the insulation structure and performance of the original equipment. At the same time, after applying PRTV paint to the shunt reactor, the following standards shall be met:
(1) Appearance: The coating surface is smooth, smooth, no drip, no sagging; (2) The coating thickness is 0.3-0.5mm; (3) Adhesion: after cutting with a blade, the artificial peeling is not stratified; ( 4) Hydrophobicity: The spray water grading method is HC1~HC2 grade, and the HC1 grade should be greater than 50%; (5) Temperature rise: It has a comparison test of temperature rise before and after coating, and is compared with that before coating, and the temperature after coating L is not greater than 5K.
No. Item Content Technical Requirements Unit Quantity
1 The material fee must be a dedicated dry-type reactor-specific PRTV coating that meets the requirements of the original manufacturer, including the tool and equipment table 42
2 Technical Service Fees All costs required by Party B for technical service implementation
3.2 Term of service: From the date of signing the contract to December 31, 2017.
Fourth, negotiate applicant qualifications and qualification requirements
4.1 Qualifications:
The procurement will be qualified after the review of the qualifications of the negotiating applicants, through the form of a qualified system.
4.2 The negotiating applicant must meet the following qualification conditions:
(1) Responsive units must be registered by the State Administration for Industry and Commerce and have independent legal person qualifications and provide business licenses, organization code certificates, tax registration certificates or three-in-one certificates.
(2) The responsible person or project manager of the proposed project shall provide the labor contract or social security payment certificate signed with the unit.
Note: Consortium bids are not accepted in this project.
5.2 Sale time from December 30 to January 17, 2017 at 17:00 (on-site deadline at 17:00 daily)
Heated Desk Pad is a heated desk pad that can be used to keep hands and wrists warm on the desk, while also improving work efficiency. This desk pad can be divided into many types, including electric desk pads and USB heated desk pads. Electric desk pads need to be plugged into a power source, and the heating temperature and time can be controlled by a switch, while USB heated desk pads can be heated by connecting to the USB port of the computer. In addition, depending on the material, this desk pad can also be divided into cloth, leather, silicone and other types. Cloth desk pads are soft and comfortable, leather desk pads are fashionable and high-end, and silicone desk pads are non-slip and wear-resistant. In short, Heated Desk Pad is a practical office supply that can improve office efficiency and also bring warmth and comfort to users.
Heated Desk Pad,Warm Desk Pad,USB Heated Desk Pad,Warm Office Desk Pad
Ningbo Sinco Industrial & Trading Co., Ltd. , https://www.newsinco.com