Once, the author was a PC-DIY enthusiast and met many friends through DIY. With the passage of time, I had become a brick migrant worker. His former friends also developed in various industries and did not remember when. His own procrastination was so severe that it took nearly 2 months to use this integrated water-cooling. Want to ask the effect? Of course there are follow-up articles
There was a neighboring PC in the community with a full set of water cooled, and it was really cool to turn on the lights. How could I compare with them if I could move bricks? One-piece water cooling is the fastest solution for both economical and water-saving. It is limited to only 120 cold rows in the ITX chassis. Good friends help me out with this cool mother's Master Liquid 120. Baidu can only find the Pro version and some of them are not. Too much.
Cooler Master MasterLiquid 120 CPU Cooling Radiator (Multi-Platform/Dual-Cavity Water Pump/Slim Water Copper/Low Noise) 499 RMB Jingdong Direct Link 
Unopened, I don't even write Chinese characters in all English. I don't know anyway.
Not surprisingly, it is Made in China, but it is a pity that many products are made in China. Foreign sales have to be purchased from overseas Haitao in a circle.
The size of each component on the product package is matched to the chassis, so be sure to match it with your motherboard and chassis before purchasing.
The relevant parameters of the product are basically applicable to the entire platform. Even if it is Intel's 775 or AMD AM2 10 years ago, if you have an older platform, I think it should be upgraded.
The fan speed is 650-2000 rpm, so this is just the speed when it turns up. In fact, it can tell that the fan is stopped when the cold exhaust temperature is not high, so it is more practical and quiet in the author's northeast. CPU load is not high Temperature is not high The fan does not turn. After the load is high, you can see that the fan will automatically stop when the cold exhaust temperature is lowered.
Open packaging, traditional component design, there is no Internet product design aesthetics.
List of all accessories, read some of the original articles, each screw should be placed so neatly, heaven, and have to shoot it, I really is too lazy. In addition to Intel's 2011 interface screws, other products should be generic, and manufacturers have not stated on the packaging.
The manual omits the language. It is completely easy to understand. The initial use of integrated water cooling is also recommended in accordance with the instructions. The fan can be selected from a single fan or dual fans. Pay attention to the direction of the fan to avoid blowing air into the chassis.
There are two 9-blade fans in the package, some of which feel frosted, and the curvature of the blades is very large, which should help the wind direction quickly and help the cold row cool down quickly.
Cool cold on the blade design is more special, the end should be a solid material to allow the blades to rotate to produce a certain centrifugal force and inertia, not just rely on the center motor to rotate.
Screws are made using a large area of ​​the pad as a shock absorber, but also to avoid the noise caused by fan rotation.
Unlike the Pro model, the basic water-cooled top cover is not fully transparent, but the LOGO is transparent. The water-cooled pipes are protected by woven nets instead of bellows.
The base is flat and pure copper has no metal plating to ensure good heat dissipation efficiency.
Through the cold light to see the cold row can see the gap is relatively uniform without quilting, etc., quality control is still pretty good. A uniform gap guarantees the penetration of the cooling air.
The fan uses MasterFan Pro 120 AB which looks the same as the Pro model.
To a bright light, translucent matte material leaves look beautiful, but unfortunately usually in the chassis, if the fan light is cool.
Have to say that one thing is not understandable, two fans are 4pin temperature control fans, but the transfer line is a 4pin a 3pin, so the theory should have a fan is always turning it? Is it fear that the double fan is too thick to ensure a fan cooling?
How is the use effect? What will I do when I make a gold coin? Detailed test please follow follow-up posts
Product categories of Disc Stylus Pen, We are the specialized manufacturer of Stylus Pen from China. Disc Stylus Pen no need to charge, you can use it directly, it is universal, it is compatible with all brands capacitive touch screens, such as Apple, Huawei, Samsung, Xiaomi, Microsoft, Google Chrome, ect. OEM / ODM are welcome, looking forward to our cooperation.
Disc Stylus Pen,Digital Stylus Pen,Cute Ballpoint Pen,2 In 1 Stylus Pencil
Shenzhen Ruidian Technology CO., Ltd , https://www.wisonen.com