LCD Screen Ceramic Hair Straightener Electric Brush Comb

Features
Pink, White, Black color, according to your address, we will send the correct plug for you.
Display: LCD
Temperature Controller: Digital
Applicable hair: Dry & wet
Max.temperature: 240 °C
Min.temperature: 80 °C
Individual Thermo plates
Comb guard and protective pads
Swivel power cord bevel
Heat proof outer shell
2 Years Warranty
Using different temperature settings to make hair straight, the hair straighter have 10 rates to adjust temperature, every rate can change 5 degrees Celsius, and we recommend that you choose the highest rate at the beginning, then according to the hair texture to reduce the temperature level.
1    Choose temperature in 210-230 degrees Celsius for a fine hair
2    Choose temperature in the 190-210 degrees Celsius for general hair
3   Choose temperature in 170-200 degrees Celsius for soft hair.
4    If you set low temperature perm, molding may be a little slowly.
5    Please press on-off key and hold for 3 seconds to turn it on, and press on-off key and hold for 3 seconds to turn it off.
6   According to personal's habit to use this hair straighter and it has no direction.

Instructions
1    please keep hair dry and neatly groomed before using.
2    Insert the plug into proper the socket.
3    Turn it on and adjust the temperature, you can use when the temperature reach what you want.
4    In the process of using, one hand pulls hair end and comb with straighter.
5    If you want to keeps straight hair last longer, please use hair styling lotion and softener lotion and wash clean before hair straightening.
6    It should not clip too much hair, if you want to clip more hair, you should be slow down the speed in the process of drawing.
7    It will be turned off by an hour automatically, turn it on when you use against.

Safety precautions and warnings
In order to ensure the proper use of this product, please pay attention to the following security matters.
1    Under 14 years-old children using this product must have adult supervision.
2    Keep it dry and don't use it in bathroom and wet area.
     Please don't knock it and fall off from high-attitude, please don't use if there is any damage.
3    Please don't rework, dismantle and repair this product.
4   This product can't be put into the fire or external heating.

Warning
1    Don't use this product in bathtub and pool, otherwise it will easily cause damage.
2    Please check product integrity before using, if any damage please don't use.
3    Please check wire integrity before using, if any damage please don't use.
4    Don't randomly place this product to avoid children to use.
5   Please wait until cooling when pack up this product.
Note:
1. The commercial invoice
We will declare the value of the products 5usd as sample, if you have special requirement, please connect with us, we will change it as the situation.
2. The clearance we don`t responsible for the clearance, and we don't accept any dispute about the clearance, also ,we don't responsible for any custom fee ,taxes ,so please buyer ready to get through the clearance by yourself ( if you need commercial invoice, we can provide you);
 And when you place the order ,pls check the plug carefully and choose the correct plug.

Why buy complete LED light fixtures when Lumax Systems can easily and less expensively retrofit your existing High Pressure Sodium (HPS) or Metal Halide fixtures? There are virtually no High Pressure Sodium or Metal Halide street, parking or other lamps that we can't replace. Wattage and Lumen output is extremely flexible and can be tailored to your lighting needs.

From LED High Bays, Low Bays (Garage Fixtures), Street Lights, High Masts, Wall Packs, Wall Washers, Flood Lights and more, we have an LED Retrofit solution for you!

How do new LED Retrofit Kits replace MH or HPS bulbs?
1). 30W LED retrofit kits can replace 100W Metal Halide or HPS bulbs.
2). 60W LED retrofit kits can replace 250W Metal Halide or HPS bulbs.
3). 100W LED retrofit kits  can replace 400W Metal Halide or HPS bulbs.

4). 200W LED conversion kits can replace 600W Metal Halide or HPS bulbs.
5). 400W LED conversion kits can replace 1000W Metal Halide or HPS bulbs.

LED Retrofit Kits

LED Retrofit Kits,LED Retrofit Light,LED Troffer Retrofit,LED Retrofit Street Light

Shenzhen Hygea Technology Co.,Ltd. , http://www.hygealedlight.com