LED landscape lighting should be "according to the need"

Landscape lighting makes night cities even more colorful, and the bright lights make the public feel the great charm of high-tech lighting facilities. To say that the most fashionable lighting fixtures today are LEDs (light emitting diodes), it is recognized as one of the most promising high-tech products in the 21st century.

In recent years, outdoor landscape lighting in major cities in China has increasingly used LED products, such as municipal lighting beautification projects, lighting projects in scenic spots, restaurants, hotels, residential areas, and major architectural lighting projects. LED replaces the traditional neon light.

So, in the LED landscape lighting products blooming everywhere, how to more scientifically apply such facilities, the reporter interviewed Ding Ping, the general manager of Lighting Design Co., Ltd., a professional lighting design company in the UK.

Ding Ping told reporters that the popularity of LED lighting products has benefited from its excellent performance. First of all, LED lighting is energy-saving, environmentally friendly, long-lived, single-tube power is only 0.03 to 0.06 watts, and the driving voltage is low (1.5 to 3.5 volts) and the current is small (15 to 18 milliamps), in the case of equivalent lighting effects, The power consumption is only one-eighth that of incandescent lamps and half that of fluorescent lamps.

Second, the LED's light source structure is lightweight (epoxy encapsulated), small size, easy to hide, can adapt to a variety of geometric sizes and different spatial sizes. It is a solid light source, is not inflated, does not have gas sealing problems, does not require a glass enclosure, and is resistant to shock and vibration. Its controllability is good, response time is fast, and it can be repeatedly lit and extinguished.

Third, the LED light source is pure and rich in color, can evolve any color, and can also form a variety of shapes such as points, lines, surfaces, and balls. The effect of landscape design is more flexible. "The LED is a weak product. There is no electric shock caused by the touch of a human hand. This also gives visitors a chance to experience LED lighting works at close range and enhance the interaction between the public and the design work," said Ding Ping.

Despite the rapid development of LED products in the domestic landscape lighting industry, combined with the development of domestic and foreign industries over the years, Ding Ping believes that the large-scale application of such lighting facilities in various regions will still take some time. There are also some problems in the application at this stage. . Ding Ping pointed out that at present, domestic LED product manufacturers are mixed, and such products do not have a unified and clear model division. Most of them are set by the manufacturers themselves, or they can be customized according to the project needs. This causes many inconveniences for later replacement. In particular, some products have rough work and seriously affect the service life.

"Although LED products have obvious advantages, designers and users should take a rational view of such products." Ding Ping said that as far as designers are concerned, they should establish a concept of sustainable use and correctly match LED products according to their functional requirements through design. Maximize the advanced nature of the product, achieve the full integration of art and technology, do not let the landscape works become a product installation show.

"LEDs include different types such as large wattages and small wattages. Different projects require different lighting colors. These are important elements that determine the content of the design plan and ultimately the landscape effect. Designers should 'according to the needs' and be reasonable. During the construction process, signal lines, power lines and other facilities must be laid strictly in accordance with regulations to ensure normal and safe use in the later period."

LED does not have "King Kong is not bad", it will also because of color temperature, waterproof, heat problems appear unstable performance. Therefore, if it is used improperly, light failure will also occur. The user should make this clear.

"LED products as high-tech products have relatively high prices, and local government managers still have to start with functional requirements and economic strength to avoid blindly following up the material, capital and energy waste," Ding Ping reminded.

   Other Modules have many types connection module and terminal block. Including Splicing modules, Tyco C5C Magazine modules, Tyco QDF modules.

Splicing of cables are simplified by the use of Splicing Rigs. Simple set-up, systematic and accurate splicing procedure considerably reduces time and effort, resulting in huge savings.

Key Features

25 Pair Modular Connectors:

– Built-in cut off blades trim excess wire while crimping. Trimming of the conductors are not required

– Insulation Displacement Connection (IDC) provides solder equivalent joint. No need for stripping of the insulation

– Single crimp connects multiple pairs of conductors

– Testing of conductor pairs made easy with the aid of in-built Test access ports in the connector

– Full range of products for Straight, Tap and Plugging applications

– Pluggable module help rearrangement or transfer of working lines, without interruption of service

– Pre-filled modules for protection from humidity and condensation

– Spliced connectors, when applied with Sealant Box, offers excellent moisture and water resistance

Other ModulesOther Modules

Other ModulesOther Modules

Specifications

Max insulation diameter (mm)

1.65

Cable style and wire diameter

0.65-0.32mm(22-28AWG)

Environment characteristic

Environment chaStorage Temperature Range

-40℃~+120℃

Operating Temperature Range

-30℃~+80℃

Relative Humidity

<90%(at20℃)

Atemospheric  Pressure

70KPa~106KPa

Mechanical Performance

Plastic Housing

PC (UL 94v-0)

Contacts

Tinned Phosphor Bronze

Cutting blades leftover cable

Stainless steel

Wire Insertion Force

45N Typical

Wire Pull out Force

40N Typical

Breaking strength or slip conductor

> 75% Wire breaking strength

Use Times

>100

Electrical Performance

Insulation Resistance

R≥10000M Ohm

Contact Resistance

The vary of the contact resistance ≤1m Ohm

Dielectric Strength

2000V  DC 60s can't spark over and haven't fly arc

Constant Current

5KA 8/20u Sec

Surge Current

10KA 8/20u Sec

 

 

 

FAQ:

Q: Are you trading company or manufacturer ?

A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance , balance before shipment.
If you have another question, pls feel free to contact us as below



Other Modules

Bix Distribution Connector,Siemens Terminal Block,Electric Connectors

DOWELL INDUSTRY GROUP LIMITED , http://www.dropwirechina.com

Posted on