Matsushita Electric Co., Ltd. will launch a LED (Light Emitting Diode) unit that enables signage reduction and power saving in December. The unit includes a "wide light distribution type" for interior lighting signage and a "dual distribution" for light source exposed signage. Light type "two series. There are 15 models and 18 models in the two series, a total of 33 models.
The wide light distribution type used in interior lighting signage is characterized by a newly developed wide-angle light distribution and ultra-thin LED module using the proprietary optical design technology. Using a wide-angle light distribution to achieve a light spot with fewer spots, the module thickness is reduced to about half that of current products, reaching the industry's smallest 1cm, making it possible to reduce the thickness of the plate. The unit can be configured in a range of up to 25cm in accordance with the required brightness. By reducing the number of LEDs, power consumption can be reduced and power saving can be achieved.
The double light distribution type used for the light source exposed signs is suitable for use in signposts such as company name signs, which are mostly made of neon lights. With the self-developed dual-dispensing lens, the light emitting area of ​​a single LED can be increased, thereby reducing the number of uses and reducing power consumption. After adding 9 colors this time, the current color is added to 16 colors. Colors are the same as neon tubes and can meet a wide range of requirements. The LED used for the light source exposed signage was first put into production in the industry in 2007 by the company.
The wide light distribution type used in the interior lighting signage is also based on the existing light white color and has introduced 4 colors such as daylight color and bulb color, and increased to 5 colors. In addition to signs, it can also be applied to architectural lighting. In light of the concern that LED lighting, which helps to save electricity, is concerned, the goal of Matsushita Electric is to expand the popularity of LED lighting by placing products that are more energy-efficient and meet diverse needs. The company will also exhibit straight-through LED lights and LED spotlights for signage at SIGN&DISPLAY SHOW 2011.
The wide light distribution type used in interior lighting signage is characterized by a newly developed wide-angle light distribution and ultra-thin LED module using the proprietary optical design technology. Using a wide-angle light distribution to achieve a light spot with fewer spots, the module thickness is reduced to about half that of current products, reaching the industry's smallest 1cm, making it possible to reduce the thickness of the plate. The unit can be configured in a range of up to 25cm in accordance with the required brightness. By reducing the number of LEDs, power consumption can be reduced and power saving can be achieved.
The double light distribution type used for the light source exposed signs is suitable for use in signposts such as company name signs, which are mostly made of neon lights. With the self-developed dual-dispensing lens, the light emitting area of ​​a single LED can be increased, thereby reducing the number of uses and reducing power consumption. After adding 9 colors this time, the current color is added to 16 colors. Colors are the same as neon tubes and can meet a wide range of requirements. The LED used for the light source exposed signage was first put into production in the industry in 2007 by the company.
The wide light distribution type used in the interior lighting signage is also based on the existing light white color and has introduced 4 colors such as daylight color and bulb color, and increased to 5 colors. In addition to signs, it can also be applied to architectural lighting. In light of the concern that LED lighting, which helps to save electricity, is concerned, the goal of Matsushita Electric is to expand the popularity of LED lighting by placing products that are more energy-efficient and meet diverse needs. The company will also exhibit straight-through LED lights and LED spotlights for signage at SIGN&DISPLAY SHOW 2011.
HDMI Extender HDMI Splitter CO.,LTD , http://www.nsconverter.com