Mitsubishi PLC with carry cycle left shift instruction - Database & Sql Blog Articles

SMD aluminum electrolytic capacitor
KT2520K26000DCW28QAS import spot
Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

(1) The mnemonic, instruction code, operand and program steps with the carry-loop left shift instruction are listed in Table 6-3l. Carry carry left shift instruction
(2) The command ladder diagram is shown in Figure 6-55. Carry carry left shift instruction
(3) Instruction description:
1 When x0 changes from OFF' to ON, the content in DO is shifted to the left by 4 bits, as shown in Figure 6-56. Carry carry left shift instruction
At this time, the carry flag M8022 is included in the loop, and the last one of the shifts from the high displacement is entered in the carry flag.
2 When the specified bit device is used as the target operand, only K4 (16-bit instruction) or K8 (32-bit) is valid (such as K4Y10, K8M0, etc.).
3 When a continuous execution type instruction is used, each scan cycle is executed once (4 bits shifted to the left), so it is recommended to use a pulse execution type instruction.

Dip Plug IDC Connector

Antenk dip plug connector Insulation Displacement termination connectors are designed to quickly and effectively terminate Flat Cable in a wide variety of applications. The IDC termination style has migrated and been implemented into a wide range of connector styles because of its reliability and ease of use. Click on the appropriate sub section below depending on connector or application of choice.the pitch range from 1.27mm,2.0mm, and 2.54mm here.

Dip Plug Connector



IDC DIP Plug Connectors Key Specifications/Special Features:
Materials:
Insulator: PBT, glass reinforced, rated UL94V-0
Contact: phosphor bronze or brass
Electrical specifications:
Pitch: 1.27/2.0/2.54mm
Current rating: 1A, 250V AC
Contact resistance: 30M Ohms (maximum)
Insulation resistance: 3,000M Ohms, minute
Dielectric withstanding voltage: 500V AC for one minute
Operating temperature: -40 to +105 degrees Celsius
Terminated with 1.27mm pitch flat ribbon cable
Number of contacts: 06,08, 10, 12, 14, 16, 20, 24, 26, 30, 32,34, 40, 50, 60 and 64P
With RoHS mark
Used for ribbon cables


DIP Plug Connectors Application

Wire to Board
Apply to Industries : PC, IPC, Consumer Electronics, Automotive, Home Appliance, Medical

Dip Connector,Dip Plug Connector,Dip Direct Pulg Connector,IDC Plug Connector,Idc connector dip plug,1.27mm Dip Plug Connector,2.0mm Dip Plug Connector, and 2.54mm Dip Plug Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com

Posted on