Entering 2014, the LED lighting industry has entered the fast lane, and all major manufacturers have made great efforts to integrate and optimize supply chain resources to enhance the core competitiveness of enterprises.
However, how should LED lighting companies optimize their supply chains? How do middle and upper reaches create differentiated and competitive products? From price wars to quality wars, how do middle and upper reaches companies seize opportunities and how to control supply chain risk? What impact will industrial technology innovations have on the industry's development trends in the next few years? These are the risks and opportunities that enterprises need to pay attention to in the new industry development cycle.
Especially as the core of the LED lighting supply chain - the light source and power supply links, the improvement of packaging and power technology has given new opportunities to the lighting industry.
In the past two years, LED flip chip packaging, COB packaging, filament lamps, intelligent lighting and other technologies have received extensive attention in the industry.
At present, the research and development of flip chip technology in foreign markets and Taiwan is close to maturity, but for the domestic market, its progress is still slightly slow. At present, only a few large packaging manufacturers and companies engaged in the early development of flip chip technology have been involved. The reason is that in addition to the current low yield of flip-chip products, the cost of flip chip technology is also a problem that packaging companies can not ignore.
The flip chip technology is different from the traditional packaging method in that the conventional package is formed by bonding the chip to the substrate by wire bonding, and the flip chip technology is to flip the chip so that the electrode is directly connected to the substrate.
In terms of COB packaging, with the continuous improvement of performance, the attitude of the current LED lighting market to COB packaging products has been generally accepted from the wait-and-see state in previous years, especially in the field of commercial lighting such as spotlights and downlights, COB. Packaged devices have begun to be widely used.
However, while the market is bullish, how can it stand out from the numerous COB products, the price is a factor on the one hand, but there are many other reasons.
At the same time, LED filament lamps rely on the advantages of high luminous efficiency, low light decay, long life and consumers' nostalgia for incandescent lamps, attracting a large number of incandescent lamps to transform LED filament lamps, including many LED companies. To the production line of LED filament lamps.
Although the European and American markets have begun to recognize, demand has maintained a rapid growth trend, but the price of filament lamps is also facing the cost of raw materials.
The substrate occupies a considerable cost in the filament lamp, and the material is mainly sapphire and glass. However, the glass is very brittle, it is easy to break during processing, and the sapphire is very hard, and warping is easy to occur during processing. At the same time, the sapphire substrate is much smaller than the sapphire substrate, resulting in a cost that is too high.
In addition, phosphors are also a key factor affecting the quality of packaged devices. As consumer demand for lighting quality increases, the color rendering index is particularly important. To improve the quality of light, you need to improve the quality of the phosphor.
However, at present, the phosphor powder market is mixed, and the price war is getting worse. How to make a reasonable choice in quality and price has become a problem faced by packaging companies.
At the same time, with the improvement of people's living standards and the quality of life, the public's demand for light is not limited to ordinary lighting. LED lighting fixtures alone can not meet the special requirements of consumers for personalized, intelligent light environment, intelligent lighting came into being, and won the hearts of many consumers.
Although intelligent lighting has become the main development direction of LED lighting in the future, there are still many problems such as high cost and complicated and complicated control connection. How to choose a cost-effective drive solution to match is particularly important.
To this end, the "12th High-tech LED Industry Summit Forum and LED Supply Chain Brand Summit" held concurrently with the 2014 Gaogong LED Exhibition will be held on September 27, 2014 at 09:30-12:00 in Guangzhou Pazhou The Canton Fair is held.
At that time, Liu Zhen, General Manager of Zhaoxin Technology, Zou Yiming, General Manager of Xinyue Optoelectronics, Wang Mengyuan, General Manager of Zhonghao Optoelectronics, Wang Pingjin, Chairman of Yingluohua, Chen Xiangdong, Chairman of Shilan Micro, and Liu Ronghui, Director of Rare Earth Research, will supply their respective segments. The chain field puzzles delivered a wonderful speech, and together with the guests to discuss the era of LED lighting market explosion, supply chain optimization and reconstruction of those things.
Packaging and Lighting Agenda (September 27, 2014, 09:30-12:00 AM):
time | theme | Speakers |
09:00-09:30 | Guest sign | |
09:30-09:50 | High-power LED flip-chip flip-chip "big market" is coming | Liu Zhen, general manager of Zhaoxin Technology |
09:50-10:10 | COB market competition is more than just price | Zou Yiming, General Manager of Xinyue Photoelectric |
10:10-10:30 | COB enhances lighting quality | Wang Mengyuan, general manager of Zhonghao Photoelectric |
10:30-10:50 | Nano-translucent ceramic filament "cost reduction tool" | Ying Luohua Chairman Wang Pingjin |
10:50-11:00 | Tea break | |
11:00-11:20 | Intelligent lighting requires a cost-effective drive solution | Chen Landong, Chairman of Silan Micro |
11:20-11:40 | The coping strategies of phosphors in the post-price war era | Liu Ronghui, Director of Rare Earth Research |
11:40-12:10 | Roundtable Dialogue: Supply Chain Optimization Refactors Those Things How should LED lighting companies optimize their supply chains, and how can upstream and upstream enterprises create differentiated and competitive products? From price wars to quality wars, how do middle and upper reaches companies seize opportunities and how to control supply chain risk? | |
12:10 | lunch break |
Washing machines are very common in every family. Banshen washing machines, with high quality, good design and best service. Many products have been sold to over 30 countries. After many years of developing, banshen washing machines are getting better and better.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction. Besides, we have received CE, CB, RoHS and CCC certifications.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America, Asia, Europe, Africa, the Middle East and other countries and regions.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Single Tub Washing Machine,Baby Clothes Washing Machine,Sharp Single Tub Washing Machine,Single Tub Washing Machine With Dryer
Ningbo Banshen Electric Appliance Co., Ltd , https://www.banshendq.com