A coupling is a mechanical part that is used to couple two shafts (active shaft and driven shaft) in different mechanisms to rotate together to transmit torque. When the machine is running, the two axes cannot be separated. Only when the machine is parked and the joint is disassembled, the two axes can be separated. In high-speed and heavy-duty power transmissions, some couplings also have the function of damping, damping and improving the dynamic performance of the shafting. The coupling consists of two halves, which are respectively coupled to the drive shaft and the driven shaft. Most of the general power machines are connected to the working machine by means of a coupling.
The role and use of micro motor coupling----the role of micro motor couplingSince the manufacturing and installation cannot be absolutely accurate, and the elastic deformation and temperature difference deformation of the foundation, the frame and other components when the work is loaded, the two axes of the coupling are inevitably required to produce a relative offset. The relative offset, the occurrence of the relative offset of the two axes, will cause additional loads on the shaft, bearings and couplings, and even severe vibrations. Therefore, the coupling should also have a certain ability to compensate for the two-axis offset to eliminate or reduce the additional load caused by the relative offset of the two shafts, improve the transmission performance, and extend the life of the machine. In order to reduce the vibration of the mechanical transmission system and reduce the impact peak load, the coupling should also have a certain buffer damping performance.
The coupling is a component that axially couples the two shafts and transmits torque and motion and has a certain ability to compensate for the two-axis offset. In order to reduce the vibration of the mechanical transmission system and reduce the impact peak load, the coupling should also have a certain The cushioning shock absorption performance. Couplings sometimes also have overload safety protection.
The role and use of micro motor coupling----Micro motor coupling main purpose metal spiral spring couplingApplicable to rotary editor coder, stepper motor, screw, industrial machinery factory.
(1) One-piece metal elastomer (threaded and slit type) with zero revolution clearance for simultaneous operation. Elastic action compensates for radial, angular and axial deviations; high torque rigidity and sensitivity; clockwise and counterclockwise rotation characteristics are identical; maintenance, oil resistance and choice of aluminum alloy and stainless steel; wide range of dimensions Molding; there are two methods of clamping and screw fastening.
(2) The spring body type allows for good deviation, allowing the maximum parallel deviation to be 3% of the maximum aperture and the maximum allowable angular deviation of 3. Compact structure, large transmission torque; no maintenance, oil resistance, good resistance; can be reversed. The above is more suitable for stepper motors.
Diaphragm couplingSuitable for servo motors, encoders, planetary gears, worm gears, extra large or large pitch ball screws, mixers, paper machines, robots, pumps and other industrial machinery.
High rigidity, high torque, low inertia, suitable for high-speed operation of the ring piece with high torque bearing of ring or square elastic stainless steel, high torque rigidity and excellent sensitivity; zero rotation gap, clockwise and counterclockwise rotation characteristics, Maintenance free, super oil and corrosion resistant. The double stainless steel wax sheet can compensate for radial, angular and axial deviations. If the length is short (two sections), the radial deviation cannot be compensated. Suitable for encoders, stepping, servo systems.
Bellows couplingSuitable for encoders, machine tools, positioning systems, ball screws, indexing plates, planetary gear reducers. No backlash, torsional rigidity, reliable connection, corrosion resistance, high temperature resistance (up to 300 ° C), name maintenance, super oil resistance, bellows structure to compensate for radial, angular and axial deviations, deviation exists In the case of the same speed operation; the clockwise and reverse needle rotation characteristics are exactly the same;
The spring body is available in phosphor bronze and stainless steel; it has a high-precision welded all-stainless steel body that can be used in systems with high precision and stability requirements, such as measurement and control information processing and communication equipment.
Cross type slider couplingSuitable for a variety of occasions, such as tachometer, encoder, screw, machine, industrial machinery. Non-backlash connection for small torque measurement Transmission structure is simple, easy to use, easy to install, save time, wide size range, small moment of inertia, easy for visual inspection, oil corrosion resistance, electrical insulation. Different slider elastomers allow the sliding between the sleeve and the intermediate member to allow large radial and angular deviations. The special bump design of the middle part produces a supporting effect, allowing a large angular deviation without bending moment. , the shaft load is reduced to a minimum.
Plum-type couplingSuitable for servo system, spindle drive, lifting platform, machine tool drive, gear box motor. Compact, non-backlash, it offers three different hardness elastomers that absorb vibration and compensate for radial and angular misalignment. Simple structure, convenient maintenance, easy inspection, maintenance-free, oil and electrical insulation, working temperature 20. C-60. C; plum-shaped body has six and eight petals; fixed way has keyway selection.
Curved tooth couplingUsed for flexible transmission, it has strong rectifying ability in axial, radial and angular directions; good mechanical properties, high temperature (+100 ° C), low temperature non-embrittlement; good electrical insulation properties, chemical resistance Corrosion, high precision, maintenance-free, easy to install. Available in a combination of nylon and steel, it will not wear out even without lubrication and maintenance.
China's leading manufacturer and supplier of solar panels, all black solar panels, PERC solar panel technology in China, we specialize in solar panels, solar power systems and more.
Jinko Solar Panels, Longi Solar Panels, Canadian Solar Panels, Trina Solar Panels, JA Solar Panels, Solar Panel, Monocrystalline Solar Panel, MONO Solar Panel, Polycrystalline Solar Panel, All Black Solar Panel, 400W Solar Panel
Power X (Qingdao) Energy Technology Co., Ltd. , https://www.solarpowerxx.com