Choosing the Right Chassis for Yourself is Not Easy: Jonsbo QS VR2 Unpacking



The Eleventh National Day is also a pleasant holiday, and it is also a festival that will make people picky. Although it is still an old platform, new hardware can make my host back to puberty. I am the most in these hardware or peripherals. The Italian VR2 chassis is Qiao Sibo, the chassis is a person's "face", can demonstrate a person's taste, so I care about the appearance of the chassis, in the chassis industry is divided into ATX, M-ATX and ITX three sizes The latter two are relatively smaller than the ATX, because it is a desktop host, so I feel smaller and more refined, considering that to place the GTX1060 this large video card, so choose the medium M-ATX chassis is still relatively safe; now many Chassis manufacturers are focused on the ATX chassis, and MATX and ITX have only a handful of options. The three brands that can be seen from the eye are welcome, Yinxin, and Qiao Sibo.
Now if the chassis is not without toughened glass is simply not get it, after the tempered glass side panels have gradually become a standard, the scope of the original choice of a small chassis is very small, plus high-value tempered glass is even more difficult to choose, Finally decided Qiao Sibo VR2M-ATX chassis; not my flattering Joe Sibo, Qiao Sibo in the past two years in the field of the chassis is very big, new products a few new products a year, although the appearance is similar (simple) but you can see that Qiao Sibo really do Now.

Unpacking articles:


The packaging does not show, Qiao Sibo always double box packaging (two boxes together), can be reflected in the carefulness of the manufacturer when the box is out of the box; VR2 chassis are available in silver, black, red three colors, silver is The metal color is also very stain-resistant color, black is my favorite color, more low-key subtle, red personal feeling too bright; remember the year before Joe Sibo's UMX1 chassis uses a black glass substrate side plate, due to the organic board hardness is not enough, Frequent use will have irreparable scratches, and now Joe Sibo's chassis is basically used this black tempered glass side panels, the surface smooth and clean, even if the surface with a dust wipe with a cloth can be a new look.

VR2 uses double tempered glass side panels, both sides still look more coordinated, the panel uses anodized wire drawing process, from the surface to see a trace of silk marks, the interface is equipped with two USB3.0 interfaces and in the audio microphone jack On both sides, this avoids conflicts when using two large USB devices.

The top of the cooling hole is removed, the overall is more concise and take care of.

Four tool-less screws on the side plate.

Tempered glass side panels have warning triangle stickers.

The bottom of the close-up, the use of a dust-proof net at the same time, the internal can install two 12CM fans, and can be adjusted properly.

On the back of the chassis, there is no motherboard I / O reserved hole, then you can understand this is a vertical air duct, remember crow 1 is this kind of air duct, is to make the motherboard rotate 90 °, motherboard I / O structure, line From the reserved hole, this vertical air duct case does not have a top cooling hole, which is that this cable management hole also functions as an air outlet.

The metal mirror nameplate on the bottom of the Qiao Sibo mosaic feels more atmospheric.

Remove the side plate of tempered glass, screw holes inlaid with a rubber pad to play a certain role in reducing resonance, the thickness of the glass itself is more than 5mm, the edge has been chamfered, and does not feel cut in the hand.

The internal structure shows that this chassis supports the installation of four 2.5-inch hard disks, or three 2.5-inch hard disks + a 3.5-inch hard disk. Two rubber strips are attached to the side panels of the tempered glass, which also plays a role in anti-resonance.

This brand name can be said to be the main signboard of Qiao Sibo chassis, with white LED lights, lighting using SATA interface, compared to the old-fashioned "D" type mouth to be much thinner, so the management of the line is also more convenient.

The VR2 chassis comes standard with three 12cm fans (two at the bottom and one at the top). According to the official data, 240 rows can be installed at the bottom.

The wind deflector is used at the top 12cm fan, and it can be discharged to the tail hole of the chassis through a certain hot air.

The VR2 features three cable management holes. Each cable management hole is provided with a rubber pad, and two 2.5-inch hard disks can be installed in the middle.

Reserving an offline hole of about 2cm still meets our daily routing needs.

Installed configuration:

CPU: I7-4790K
Motherboard: Gigabyte Z97-WIFI
Memory: Kingston 8G2
Graphics: GALAXY GTX1060 Hall of Fame 6G Limited Edition Hard Drive: GALAXY GAMER 512 SSD + Seagate New Coolfish Pro 10TB
Power Supply: Quan Han Hydro g 750W
Chassis: Joe Sibo VR2
System: windows7 64-bit flagship

Three Qiao Sibo FR-101 12cm cooling fan.


The uniqueness of this fan is that the edge of the blade is equipped with an annular light guide ring, which is special, that is, I do not know how effective it is.

Gabriel radiators were used, and they were made of steel wire because they had no fasteners.

Because VR2 can only install a 3.5-inch hard disk, so try to choose a large-capacity hard drive - Seagate New Coolfish Pro 10TB.


Fully enclosed structure, 7 discs filled with ammonia, this hard drive is also the largest capacity on the market.

Similar in appearance to the traditional HDD, but the weight has increased a lot. With this 10000G high-capacity hard drive, all big sisters can live at home.

GALAXY GTX1060 6G Limited Edition, this card is higher than a different graphics card.


With a PCB metal backplane, it is said that this graphics card can be used to change the color of the LED above by "magic disk" software.

Rich interface, with a key overclocking function.

32cm video card just can fit in, but the premise is to remove a bottom 12cm, if you choose VR2 chassis, then look at the length of your video card.

In addition to the two 2.5-inch backplane at the back of the face is also a two-inch 2.5-inch hard drive, where you can replace the 3.5-inch hard drive, install the card directly into the buckle, or relatively simple.

The power supply uses Han's Hgdro G 750w power supply, and the old brand is still trustworthy.


The back of the line, because there is no custom line, so it feels a bit chaotic, but for the 2cm wide management line space is quite adequate.

Power on the VR2 chassis LOGO will emit white light, if you can toning is better.

Chrysanthemum appears!

The graphics card is red or more coordinated, and later there is time to replace the LOGO's LED with red.



Product Model:VR2
Color: Black Product Dimensions: 238MM (W) 378MM (D) 399.5MM (H)
Metal material: front plate/rear plate/top/bottom/aluminum-magnesium alloy with a thickness of 3.0mm, internal hardware structure: 1.0MMSGCC steel plate + blackened coating treatment, side plate: 5.0mm thickness Full tempered glass mainboard Support type : ITX/M-ATX (within 245 x 245MM)
Drive position: 13.5〞, 42.5〞
Cooling system: top: 1120MM fan; bottom: 2120MM fan
CPU heatsink support height: 190MM graphics card support length: 320MM (if the bottom of the fan is less than the length of 300MM)
Front interface: USB3.02, Headphone 1, Microphone 1
Can support PCI expansion slot: 4 power support: standard ATX PSII PSU (generally called large power, non-standard, length does not exceed 250MM)
Weight: Net weight: 9.0KG

to sum up:
Qiao Sibo VR2 this chassis is still remarkable features, such as the appearance of a simple atmosphere, 3mm aluminum-magnesium alloy material, double-sided tempered glass, vertical duct, etc., workmanship is still relatively good, angular details of the processing in place , As a mid-end chassis can do this is indeed worthy of praise; in the installation process is not compatible with the issue, with the assembly of 12cm light fan after the completion of the effect is still consistent with expectations;

Disadvantages are also some, the top of the use of Phillips screws to fix the top plate, so that when swapping plug I/O line will be more tedious, the cover can be designed to snap for easy disassembly, hope manufacturers can improve, overall VR2 Still worth checking the chassis.

AK Control Cabinet

Ae Control Cabinet,Electrical Ae Control Cabinet,Ae Motor Control Cabinet,Ae Electrical Control Cabinet

Huaian Qiangsheng Cabinet Co., Ltd. , https://www.qscontrolcabinet.com

Posted on