Why is there no sound when HDP broadcasts live?

The reason why there is no sound in the HDP live broadcast is because the device decoding is not supported. Although smart decoding mode adjustment is supported, it is occasionally less “intelligent”. At this time, the easiest way for the user to do it is in the HDP broadcast. Manual debugging in the decoding mode setting:

1, press the remote control menu button in the HDP live application to call out the menu



2, use the remote control up and down keys to select "decoding mode"



3, use the remote control buttons to select "hard solution" / "soft solution"



3.1. When the "soft solution" mode is selected for the first time, HDP Live will pop up a plug-in installation confirmation window and click "OK".



3.2 After finishing the installation, you can switch to the "soft solution" mode



The occurrence of this type of problem is generally caused by the lack of decoder chip compatibility. Although the soft solution can temporarily alleviate this situation, the soft solution code is derived from the plug-in application, so the decoding compatibility is stronger, but the CPU resources occupied by the soft solution are needed. Not small, so if your device CPU configuration is not high, then this method is not perfect, it is recommended to start some of the mainstream models (millet boxes, Lynx box, etc.) as a common viewing equipment.

R18 Bone Conduction Headset

R18 Bone Conduction Headset,Waterproof Wireless Headphones,Wireless Sports Earphones Headphone,R18 Sport Headset

Shenzhen Lonfine Innovation Technology Co., Ltd , https://www.lonfinesmart.com

Posted on