Philips Hue Light is not perfect

Philips' previously released Hue lights illuminate the trend of fully automated LED bulbs through Android and iOS technology.

The E27 bulb has a luminous flux of about 600 lumens, which is equivalent to a traditional 50w incandescent lamp that matches most existing lamp holders and provides warm light. Users can control more than 50 lights with Android and iOS programs, and adjust the brightness and color through the touch screen.

However, this invention is not perfect. When you turn the light bulb on or off using a common wall switch, the system is reset and ignores the previously set program and restores it to white light. This also brings great inconvenience to users. For this reason, Philips also needs to update the software to make up for this shortcoming.

In addition, in order to spread the light evenly in the living room, the user needs to install a large number of such bulbs, and the cost is also large. To buy 3 bulbs, you have to buy the starter software for 179 euros. In addition, each lamp has to be charged a 50 euro purchase fee.

Although the maximum energy consumption of Hue bulbs is only 6.3W, it still takes a long time to receive energy saving returns in terms of cost.

Introduction of LED indoor module: the indoor display above the market is composed of LED indoor module. LED module is a kind of product which is widely used in LED indoor module market. LED module is a kind of product which arranges LED together according to certain rules and orders. Vision display plays an important role in the market. LED modules are used in places where large screens need to be installed, such as stages, shopping malls, doorheads, etc.

module

Here are some basic parameters of LED module

1. Color: at present, the main colors in the market are monochrome, full color and seven color single point control. Customers choose different colors according to the project requirements.

2. Voltage, the main voltage of the module is 5V, and the energy-saving module is 3.8V. The customer must be responsible for the power supply with accurate voltage during use, otherwise the module is easy to be damaged.

3. Working temperature: the normal working problem of LED is usually - 20 Â° ~ 60 Â°. Under special requirements, it can be - 40 Â°. For other special environments, we will deal with it specially.

4. Point spacing: the LED point spacing is also the product model in the industry, and the point spacing is the distance between the center points of two lamp beads.

5. Brightness: This is an important parameter of the product. The visual display is higher than the industry standard level. It can be adjusted according to the requirements of the site.

6. Module size: module size refers to the length and width data of the module group.

8 Power: generally, the display screen has average power and maximum power. When leaving the factory, the most appropriate power will be set, and the required power can also be set according to customer requirements.

9. Refresh frequency: it means that the higher the refresh is, the better the image quality is. As a benchmark of the industry, the refresh is far higher than the industry standard.

The more mature the industry, the higher the requirements for products, the more popular customization, visual display, higher than the industry standard, the more mature customization, as long as you dare to think, we can help you achieve.

Indoor module

Indoor LED Display Module

P2 Led Module,Indoor Led Module,P10 Led Display Module,Indoor Led Display Module

Shenzhen Vision Display Technology Co,.LTD , https://www.ledvdi.com